Best 2023 Audi Q7 Roof Racks

Fit up was easy, worked perfectly on our 2018 Q7 with dual kayak mounts.

Used for 2018 Audi Q7. With thule areroblade. Solid precise parts. Etrailer was Great with shipping and communication.

Easy to assemble and install. My only issue so far is that they definitely whistle more than I expected. I suspect this has to do with my vehicle (2013 Audi Q7), as the tone and loudness decreases when off the accelerator/braking. I think the back-slanting roofline of the Q7 expose more of the underside of the rails, leading to more whistle. When braking or cruising, the whistle is quieter/gone. Hopefully that dies down some when the basket is installed and there is gear/luggage in it, therefore decreasing the amount of airflow past the rails.

Great fit, sturdy well built product and looks awesome on my Q7.

I've attachec a few pictures of the Yakima rack on my Audi Q7. It took a few attempts to find the right combination of attachments, but in the end, the pin attachments work best with the access points on the factory flush-mount rails. Great product!!!!!

I ordered the Yakima roof rack, with the Hullyrollers for the back crossbar and the Mako saddles for the front crossbar to use with my kayak. It arrived just like they told me and I put them on my car the eveningit arrived. Got to finlly use the roof rack on June 22 to go out kayaking and it worked great. Only thing is I did not know about the air reflector piece for the front crossbar. Now I will be ordering it to help with the wind noise.

Thule rack looks great on my Kia Telluride. The pieces took a while to get to me because they were on backorder but it's not etrailer, they were on backorder everywhere. I messed up a piece of the rubber while installing and etrailer sent me another one free of charge. Would definitely recommend etrailer.

Product came in as ordered and worked great. Will definitely be back for future needs as Stacey in CS was very knowledgeable and friendly!

Bought the Thule Wingbar Evo 118 crossbars and Thule Evo Raised Rail footers and installed them on my 2016 RAV4. Pretty easy to install and I did watch a few videos online to make sure I was doing everything right. I like the new raised rail system from Thule as it is clamp style versus the rubber strap - both work very well, but the newer clamp system is nice because the tool you use to tighten the footings clicks when it reaches the right tightness so you don't over tighten it. I recommend these rails and the footings (Thule 710401) as the system is quiet when driving and looks good.

Perfect. Low Profile, Looks Good. Solid Rack System. Had a year and Highly recommend

Hi George from etrailer, The rack is awesome! Strong, firm hold and nice looking. When doing surveys, I put my ladders on the rack. I highly recommend this etrailer.

Easy to assemble and install. Love the way etrailer packages everything you need and they all are correct for the vehicle you are mounting them on. Once installed they appear very strong. Installed on a 2023 Chevy Tahoe and did not interfere with the sunroof.

I have used Yakima products for decads, after two decades I got a new vehicle and I needed a wider set of bars. After two decades the products are still relatively easy to install, and fit tight and secure to my vehicle. Do take care to pay attention to the installation instructions and follow the recommended measurements very closely and the installation will go smoothly.

Sturdy, support the roof rack well

Free delivery that showed up in 3 days!!! Can't beat it. The crossbars with the Control Towers and LandingPad 9 fit perfectly on my Honda Element. Had them installed in about 30 mins. Don't have my cargo box yet and wanted to test strength, so I had my 110lb wife standing on them with no issues (yes, the car was parked). Plan to take a long camping trip next week with a cargo box on top...wife will be in the vehicle:-)

works good

The rails looks and functions great on my 16 Mini Countryman. However, when I drive over 35mph, there is a sharp hissing sound coming from the rails. these rails are supposed to be aerodynamically enough to eliminate sounds. I tried switching the front to rear and same issue. I went as far as taping any voids to see if that would help. Nothing works.

The Rhino Rack HD crossbar kit for tracks fits my SyneticUSA Pro retractable cover perfectly. RR includes several track nuts of different sizes to match to your particular track. I love the quick detach capability of the towers and that they also lock for security. The HD bars are essentially the same dimension of 1 5/8" unistrut/superstrut so you can find all sorts of attachment hardware outside of what RR makes. This makes it easy to securely bolt your gear down to the cross bars and customize with easy to find hardware at your local home depot. The 65" HD bars are perfect for a mid size truck like my Tacoma.

The rack more than exceeded my expectations. It was easy to assemble and mount on the cap of my Tacoma truck. I was pleasantly surprised by the aerodynamics which virtually eliminate wind noise, even at highway speed. I pirchased the rack as a permanent mount for a 4rod flyrod holder which I use daily for fishing. The Rhino keeps everything “tight and right”. It has worked perfectly for nearly three hundred trips and over 15,000 miles this year.

Great product and easy installation. Much better than the Thule factory racks that came with the leer truck topper rail system. Also like how they can unlatch! I hauled a fishing kayak and a Yakima rod coffin case all the way from Florida to North Dakota. Racks are strong.

The rack is great. Well made with quality components, and compared to other brands, a very good value. I purchased the rack(s) to go on the top of a new Leer canopy with factory installed rails, supplied by Thule. The Rhine Rack cross bars are a great and less expensive alternative to other brands. My only complaint is that the Thule rails/tracks require the removal of end caps and mounting bolts to install the crossbar mounts, and that requires breaking the watertight sealing installed at the factory. That’s not the fault of Rhino Rack. However, if they could develop a mounting system (ZwifLoc?) that did not require access to the track from an open end, it would be SO much better!