Most Popular 0 - 5 Feet Long for 2021 Subaru Legacy

Very heavy duty industrial-grade trailer lighting cable. Cable is a little thicker/stiffer and also heavier weight than expected, but will work well with a vehicle-mounted 4-pin lighting connector.

I used this product along with your 7 round pin to 4 flat adapter, item #118709, on the lights on our Brent and Parker grain wagons. This has worked out great so far. We haven't had the problem of too much or too little cord for the trailer lights, which allows the cord to get pinched and cut or stretched and broke. I just need to come up with a method of securing the cord and plug to the trailer tongue when not in use.

Well made. Bracket on hitch was a bit weak, though.

Fast and exactly as promised. Will order from them again.

Delivery was quick and electeical was just what I was looking for. Was able to mount bracket to hitch and running the wiring was easy with it all color coded. The single sheathed trailer plug was also what I was looking for and priced below anywhere else. Was very industrial and was almost an exact match to replace the existing one on my triton trailer.

I have been very pleased with etrailer orders recently. Everything shows up when expected and products are as expected. Attached are a couple before and after pictures of my recent project to add lights to a cargo rack per my wife's request. Thanks for the professionalism of all at trailer

Great product! Wired this harness up with my trailer wires and have not had an issue since. A quality product!!

Worked as advertised. Easy ordering,fast delivery.Very satisfied.

Installation was easy, good instructions. used this in conjunction with a Prodigy brake controller on a 1973 Chevy K20 square body pickup, replacing my original. wired using crimp on connectors, fast easy, clean. Re taped all connectors and loom. Used silicone on the back of the to seal off moisture.

We replaced a worn-out OEM harness on our 2005 HR Endeavor, and it works perfectly!

Worked great for my application. The wire colors for 7 way plugs aren't universal so I had to pull up a pinout of a 7 way plug and ohm out the wires to the plug to confirm what went where. But the quality of the plug is excellent. After a year of use on a salt water boat trailer it works great. Just makes sure you heat shrink your butt splices and a little dielectric grease in the plug goes a long way.

When I ordered this harness I thought I was getting a standard 7 way for a conventional trailer with brakes. What I actually got was a harness made for a camper/RV hook up. The wires have all the colors you would expect but all the lights/turn signals are coded into the plug completely different. After spending a good deal of time carefully matching, soldering and heat shrinking all connections to my new trailer harness, I was very dismayed to find only the brakes actually worked. After a bit of research I found a schematics page on the etrailer site and discovered the problem. As this is a molded plug I could not take it apart and just reposition the wires inside the plug. Another full hour or more of rewiring followed and now all is well. The harness itself is of very good quality but was not labeled/identified properly. This could have been prevented if etrailer would clearly label this harness as a camper/RV harness only.

Excellent. That the product I was looking for.

I used the Hopkins 3 to 2 converter to make a 6-pin round to 4-flat connector for my Winnebago View motorhome. While there are 6-4 plugs available to do this, they do not work on the Winnebago View (no brake lights). This adaptor works great.

E-trailer: they've got what I need at a reasonable price. This is what e-commerce should be!

I received the product after just a few days. I had many technical questions that were answered by a competent service person. The product arrived in great shape and I had reviewed their installation video so installation went very quickly and easy. My 2011 Chevrolet Silverado is equipped with a 7 pole connection so I bought their adapter to convert to flat 4 pole connection. That an the CR-017 led worked very with first try. I also bought the trailer hitch lock at the same time. All products are very easy to use.

Simple and easy to use; just plug it in and connect it to the trailer harness. Works like a charm!

Not installed yet but looks as good as one used before in a former vehicle. The actual adapter I received is "Reese", which is a reputable brand for towing accessories.

Bullet-proof connector, if not the most elegant. Used in my case for custom "adventurization" wiring on my 2007 BMW F800ST motorcycle, now just road tested this late summer - early fall 2017 on a three month, 18,000 mile loop out of Chicago through the Arctic & Pacific Northwest, including the Dempster & Dalton Highways. Had a custom wiring harness that had to be able to be removed in order to get at the engine, hence the need for the connectors. A few photos should be attached.

Very helpful. Fast service. They always have a solution!

I have now installed the following on my 2017 Wrangler: Brake light relay kit . Hopkins Towed vehicle Tail Light wiring kit. Blue Ox base plate. Blue Ox Patriot Portable RF Braking System. All of this has taken about 3 days of work spread out over a week or so. Overall it went well. Not too many surprises. Crawling around under a car at 71 is a bit of a strain but I'll get over it. I must say that Donna P. has been a wonderful source of great information and has stayed right on top of the process. eTrailer has been a great source for this project. I would recommend you all with no hesitation.

I love the new setup for my truck. I changed the receiver to a Draw-Tite Ultra Frame model and mounted the connection on the receiver. It works great and accommodates both of my trailers with the 7 pin and 4 pin connections. Couldn't be more pleased. My rewiring of my light trailer is flawless, solid connections and good quality. Thanks!

This product works as expected. There is not too much to the installation, just plug it in properly and mount the ground wire. I did not find an easy way to mount this to my wife's Odyssey, or to the trailer hitch (item# 75270). Luckily, I do prototype design and manufacturing. So I came up with my own solution. I designed and made my own bracket to mount the 7 pole to the trailer hitch. It works like a charm, and looks great!

this connector along with the short L bracket and the mount bracket- gave me a nice connector to my hitch. Though I used the short connector and did have to slightly bend it to allow the 4 to 7 pole connector to fit. If Id bought the long L bracket-- It could have worked-- but bending a little worked well.