Most Popular Round for 2021 Jeep Cherokee

I bought a couple more of these two-diode LED clearance lights to add some more lighting to the rear of my kayak trailer. They work nice and are easy to install in 3/4" holes that I drilled through a piece of aluminum angle. The trailer has orange clearance lights on the front sides, red clearance lights on the back sides, the stop/turn/parking lights on the back, three red clearance lights on the back, and a white LED license plate light. It's really lit up and very visible at night from the rear and sides. Thanks to etrailer.com for great products and services! My wife and I like to kayak, but we don't like to deal with putting our kayaks on roof racks on the top of a car. So I bought a used Load-Rite trailer that was designed to hold one Jet Ski, and added a frame made of slotted angle and 2x6 lumber to hold the kayaks, and a cargo box from Tractor Supply to hold kayak seats, life jackets, towels, sun-protection clothing, and some spare gear (ropes etc), and bought all new LED lighting from etrailer.com. The paddles are too long for the cargo box so they have to go in the car! The kayaks are tied down to the trailer with several ropes front and rear, so there is a lot of safety factor in the design....I don't worry about the kayaks coming off the trailer! The entire rig works great....when we return from a kayak trip we just back the trailer in the barn and it's ready to go for our next trip. I put a 5" diameter wheel on the trailer just behind the hitch so I can push it around on flat level surfaces. See the pictures.

Great addition to the basic, rear brake lights of a camp trailer. I added these LED RED to the brake/turn function, within the existing, small holes in the rear bumper--much more apparent when stopping/turning. These sealed LED lights are very common on larger trucks and trailers now. Easy to install and very robust assembly...priced right!

These were designed as a clearance light application and at a great price. I bought them to use as turn signal lamps on my RZR. They are high quality and extremely bright when lit, so they work great for both applications. These guys have great parts at a great price and quick shipping. I would recommend them to anyone needing trailer/boat/lighting. Thanks guys.

I actually purchased these lights to use as a side marker light on my Jeep Wranglers after installing after market fenders. Lights have worked fantastic up to this point

Bought these LED Stop/Tail lights for my new dump trailer. The factory stop/tails are mounted very low, and any car directly behind me blocks my lights from the 2nd or 3rd car behind me. So I mounted these new ones up as high as I could to let people know I am stopping or turning. I also mounted a side marker light so I could see where the trailer was while backing up at night. The factory marker lights are so low I can’t see them in my mirrors because they are blocked by the step on the drivers side and the spare tire on the passenger side. I am a retired 18 wheeler driver of 47 years.

I am in the process of renovating a 1966 Airstream. I wanted to upgrade the tail lights and the clearance lights. I found etrailer.com on a web search. I ordered the round 4" LED, rubber 4" grommet, and Oval LED clearance light. The round stop with grommet adapeted perfectly into the lens on the Airstream. I will feel so much safer now with the added visability. The lights are stellar.

Great replacement for a set of older incandescent style lights. Far far brighter, super easy install, larger size let me pretty well cover the existing holes from the old rectangular lights. Does have a license plate holder but those are usually pretty brittle anyhow. I just got a flush mount plate bracket which looks better.

Wow very nice quality. Very bright and looks great on my vintage Shasta. Also Etrailer customer service is wonderful!

I had looked around for a light and e trailer had what I needed

I was having difficulty locating this particular style brake light at my local auto parts store, but had no problem finding them at etrailer.com. I have an oversize spare tire on my Jeep and use this style brake light as a replacement, as the stock third brake light was of no use. The website was easy to navigate, and shipping was fast.

updated our motorhome from the old square type with bulbs to these round type led lights and could not be happier..bright and a more modern look...highly recommended

I have a Newmar coach which I had a LED taillight that burnt out. I called Newmar and checked several other suppliers but no one had the one I needed. I then logged on to etrailer.com, found the exact match, ordered and received it. I’ve used etrailer in the past for towing related items but they will be my first shopping stop for all my RV needs.

This trailer light was an exact match for my original equipment light and easy installation.

I needed a tail/stop light for the rear of my Fairmont railway motorcar and thought from your on-line description that this product would be satisfactory. I was right, it is a good size and bright enough to be very visible in bright sunlight. As you can see from the pictures, to make it match aesthetically I attached the lamp to an aluminum plate cut to fit in an old auxiliary lamp housing. The railway car runs in both directions hence has head and tail lights on both ends. I am very satisfied with this light.

Lights were exactly what I wanted very bright and great quality shipping was way faster than expected

I love the products but the quality of the packaging was horrendous. When I opens the box up there wasn’t enough packing paper in the box to keep the lights from shifting in the box. Most of the lights were out of the low quality unsealed plastic bags and were a scratched and marked up. Along with that there weren’t any bags for the smaller 3/4”lights and were loosely thrown in the bottom of the box with the grommets not being attached in any way. After I pulled the contents out of the box I realized that there weren’t even enough crappy plastic unsealed bags for all of the main 4”and 6” S/T/T/B lights and to finish it off all the electric grease that was in the plugs was not covered in any way leaving all the bags and contents of the box completely covered in di-electric grease. Overall after cleaning all the lights up the products are amazing except for it took a little research to find out that the 4” STTB lights aren’t supplied with pigtails. I’m disappointed of the quality control for your company for the price that you ask.

Your service was excellent. The trailer light I needed was well described at your website. The ordering process was easy. You sent an email notice that the order was processed and shipped on the same day - wow. It arrived quickly and is now installed. It works perfectly as expected. Much appreciated... GZ Westcliffe, Colorado

This is a great looking classic trailer brake/turn light, which I used on my homebuilt woody teardrop. The lamp is quick and easy to change . . just pop it out from the base, unplug it, and plug in the new one. Etrailer, as always, does a great job providing all the parts a builder needs!

I have finally finished the install of the great products that I’ve purchased from Etrailer. Curt 24K 5th wheel hitch, the lube discs, the front receiver hitch tube, the Factory 7-way connector and 7 -way extension (I have 3 7-way plugs on my truck) and the countless number of LED lights. The service is amazing and the customer service I received was fabulous. I really like these folks as they were vary knowledgeable about what I was after and pointed me in the right direction to accomplish my end goal. Thanks to everyone at Etrailer. I couldn’t have done it all without you.

Great little running light puck! Easy to install and very bright at night and is even very visible in daylight. Only about an inch in diameter on the outside, you wouldn't think it was much larger from the amount of light they provide.