Most Popular Sliding Rack for 2021 Honda Ridgeline

Very heavy duty ladder rack that does not "whistle" while you drive down the road. Easy install overall, and it is very easy to install and remove the racks as needed after the original install. At the time of purchase this was not available for my vehicle with a short 5.5' bed, but with very minor fabrication the rails for longer beds fit perfectly. I have recommended this rack to several people since purchased a year ago.

Great product! Packaging could be better for the larger pieces (rub marks). My 2018 Ram 1500 quad cab came with some small challenges that I had to solve myself. No videos or written words available. Basically if your bed rails are covered with a bed liner you need to remove the plastic sleeve in the rear stake pockets. Otherwise you won’t get an equal spacing from one rail to the other. You will also need to use the provided rubber tape with the wedges in order to make the rails level. Otherwise it went together great.

This is essentially the same rack TracRac has been making for years – great materials and very well engineered. It is not spec'ed for a Gen2 Toyota Tacoma, because the composite bed doesn't have stake pockets – but after I popped off the plastic bed side caps, there were lots of options for attachment. You just have to be comfortable drilling holes in the rack and in the sheet metal of your truck. In the end, it looks and functions great.

Not A bad system. I like that you can adjust the ladder racks spacing on the TracRac rail. The hold down pieces on the side of the racks are very durable. Its a very nice looking system, adds flair to my truck. I haven't pushed in on the 1250 lb carrying limit yet but it handles 500-600lbs without any issues.

I did install the Thule TracRac SR. I did it on my own and it went well. I'm really pleased with it. As for the photo, I will send you one, once I've washed my truck. Can't make a photo with a dirty truck. I will leave feedback later after some time with the rack.

Excellent rack. I've using these racks for about 15 years.

etrailer.com is an outstanding company. I purchased a Thule system in January. Due to logistics (my fault) I tried to install the system in April. Three of the attachment arms were incorrect. I contacted Ashley of etrailer, the sales representative who sold me the system, who patiently listened and after receiving the needed photos and explanation, etrailer sent me a replacement system. The new system was installed and the truck is ready to go. Ashley's professionalism, communication skills, product knowledge were excellent. Ashley and etrailers' commitment to solving my issue expeditiously puts etrailer in a class by itself.

Great product, light weight , well built. Customer service is very responsive. have a Ford lighting so wanted a light truck rack. easily removal to save on range/ milage.Made in the USA.

Great rack! Very flexible design.

This is an awesome system, and in my opinion, the best option to pair with the Retrax ProMX bed cover. The sliding rails for adjustable distance is awesome. Can't beat the versatility of this rack, and after adding additional load stops for cantilever rail, bolt on ratchet straps, and base rail tie down points (which will actually allow me to haul things on top of my bed cover, which is rated to carry 500lbs) this system completely changes my ability to haul whatever I need in my truck.

Great service and fast shipping and handling. Melissa T. Was very helpful finding answers to compatibility questions with other components. Site has great video reviews on their products. Definitely recommend them!… Best prices too.

The ladder rack is awesome + It took 3 times to get the right parts - Special thank you to Tiffini S. from customer support center, she was very professional and helpfull.

I ordered the TracRac SR (sliding rack) for my 2019 Ram 3500. It took a while to get here, probably due to the current situation weall in. It came in 3 boxes on 2 days. (Just so you know what you'll be looking for) everything was packaged very secure in the boxes. I order the Cantilever with mine, so I had to swap out a couple parts. No big deal. Everything was explained in the instructions. It took me about 3 hours to install. The hardest part was getting the bed rails to align. I got them within 1/16th of an inch. Good enough. The rack is a great addition to the truck. I stepped down from an 8ft bed to this 6ft 4in bed. So this was a necessity. The rack is solid. I'll be putting it to work right away

Very happy with the rack on my 2018 Silverado. I also have the Back flip hard top bed cover. I am able to open all but the very last position. I might still be able to adjust the rails and to get there but it hasn't been an issue. Used it to haul lumber and I made a bicycle rack that works with the racks and the bed cover down. Works great. Was not hard to install.

I looked at several rack systems before purchasing the Thule. Great product with great versatility.

Absolutely love it. Such an easy install, goes on and off in minutes, adaptable and adjustable, great weight capabilities and holds up the the elements well. It also takes seconds to slide the rear section up with the barrel adjusters to fit a motorcycle in the back. I've used it for ladders, construction materials, kayaks, and a place to hang my hammocks when my kids need a nap, ha. The retractable ratcheting straps (sold separately) are incredibly convenient. The only way this product could be made even better is if the vertical arms were height adjustable.

Works as it should. Be sure to put never seize on all of the bolts. Stainless and aluminum don't mix.

Fit perfectly. Was a little concerned that it wouldn't work with my bed cover. But it does and couldn't be happier.

It was a tight fit with my existing GatorTrax Tonneau Cover but doable. The Bull Ring Pocket Router made cutting of the stake pockets a breeze.

DO NOT TRUST THE ADVICE GIVEN BY THE SO-CALLED EXPERTS AT ETRAILER. This rack WILL NOT fit the Carbon Pro Bed...I was told by 2 different "experts" that this rack would fit my 2023 Sierra w/the Carbon Pro Bed, since this rack mounted to the stakebed pockets and not to the underside of the bedrail. After receiving my order, I prepared to install the rails and cutout the front stakebed pocket covers which is required to do the install (also indicated by Kevin C. from ETrailer). As soon as I got to step 3 of the rail install instructions, I knew there was a problem. The instructions indicated there was a hole on the inside of the bed to secure the rear stakebed pocket adapter to. There is no hole or any other type of access to any of the stakebed pockets on the Carbon Pro Bed. So, now I have altered bedrails and have a rack that does not fit. It is completely irresponsible of the "experts" at Etrailer to provide information or direction that is not true or hasn't been confirmed.

I bought this TracRac SR for a 2019 new gen GMC 1500 AT4 with a Lomax/WeatherTech tri-fold hard bed cover thinking I would still be able to open and close cover. I could not. The base rails overlapped the inside bed rail just enough to prevent opening the cover. The base rail itself measure 4" wide. When trying to size it up on truck I did notice that when mounted it looks like the rear base rail is larger than the truck bed rails and hangover the outside of the rails. Some people may or may not liked the fact that it does not follow the contour of the truck bed. I only opened the base rail box so can not comment on cross bars. The base rails were well made and very heavy duty. etrailor customer service is one of the best I have ever dealt with! They do a amazing job, the entire process of ordering to return was incredibly easy and they have a great knowledge of the products they sell.