Most Popular CIPA for 2020 Ram 2500

Really loved my cipa mirrors on my Chevy. The dodge mirrors are tight if you use the right thickness wedge. Problem I have is that if your backing up and want to pan the factory mirror down for rocks or stumps the overhanging lip of the cipa mirror stopes the factory mirror. Will have to grind some off that lip for factory mirrors tilt up or down to clear for the tilt of factory mirror.

Cipa mirrors fit perfectly on my 2016 Ram 2500. Installation is fairly simple. Slide them on and tighten the supplied hold down nut. A supplied wedge prevents any damage from the hold down.

This is the 2nd mirror I have ordered. On my 2nd trip using the towing mirror's the driver side came loose going down the highway, but I was able to catch it before it fell off. The passenger fell off and I'm not sure when. I think the mirror's do a good job as far as seeing behind you while towing a RV. Before I use them again, I'm going to add a small bungee cord to hold it in place. This should keep it secure enough while going down the road. I hope the manufacturer reads this. With the mounting screw being plastic, you try not to over tighten the screw to keep it from stripping. A added strap would be a great improvement. My brother in law also purchased a set and thought some kind of strap would make him feel better about the way they were mounted.

Doesn't fit my truck

They are very easy to install and remove when parked for extended periods. Costumer service was very helpful with getting me the correct marrows.

The company was fast and gave lots of updates for shipping. Once i received product my concerns were met. The straps are BARELY long enough to connect around my mirror. Once it is straped properly the tension on straps pulls them right out of the retaining clip. I ordered these because i have a 11 silverado just like what was in the product pictures. Save your money and get something else because theres no way these will make it down the highway they will barely stay on just sitting here. Kinda disappointed because i bout these for our first camping trip this weekend but these will not work. Seems like a good company just crappy product.

So-so construction and design. With one modification they're more than acceptable. The arms and straps will slip and loosen if installed on triangular or tapered housings. Mirrors that have backs nearly parallel to the mirror face, and have upper and lower mirror edges that are nearly parallel are not affected. Adding a peel and stick plastic wall hanger to a tapered housing will stop the strap from slipping and loosening. The ball and socket mount is good and tight, but the stud on the ball is loose in the arm. I think most of the jitter and vibration others report is from this sloppy clearance that the stud screw can't tighten enough. I'll be addressing that as well. A nice option for those of us that a) don't tow a majority of the time and don't want full time extended mirrors, and/or b) tow with multiple vehicles and prefer to have adjustability to fit our 'fleet'.

So far, so good. I received the CIPA mirrors today and immediately installed them. Installation instructions are straight forward. I took a test drive of about 15 miles; there was no noticeable shake or rattle and the mounts did not loosen. As with factory curbside mirrors, objects are closer than they appear with the CIPA mirrors, too. Our first trip towing is a couple weeks from now. I will update my review after the trip.

The view is excellent. The mirrors do not vibrate. In speeds over 50mph, the tube would turn inside the clamps and the mirrors would turn upward, making them useless. Solution: I cut off a finger from a nitrile rubber glove and pushed it over the tube. Now the mirrors stay put.

Pros: Very easy to install. Will fit on almost anything. Cons: Bit of a challenge to adjust the in/out tilt on fixed mirror housings. Would like a little more height, but it's OK. This is a good solution for the casual user like me. Installation is painless. If you need more control over height or tilt, this is not for you.

I bought the trailer mirrors for my Jeep Grand Cherokee to pull my pull behind trailer. See pictures. The mirrors attach easily and securely and shake very little when driving. I need them mostly when backing up and I can see where the trailer tires are going. The mirrors do not adjust easily but when you do they stay in place. What I especially like is the size of the mirrors and having two independent mirrors.

They are fine for the price but hard to adjust the mirror itself after installation. I’ll be installing the bigger factory trailer mirrors pretty soon.

They appear to be as advertised, well made and should be easy to install. That may change once the rain stops and I am able to actually install them and then use them during the towing operation of our trailer. But i feel pretty confident they will be very helpful.

So far ok.I won't try them out until this weekend.

Unable to tighten mirror clamps enough to eliminate mirror from shaking, preventing clear image while driving.

The mirrors help me tow our Lance trailer safely. The adjustable mirrors benefited with a touch of dry lubricant on the joint inside the housing. Emily at etrailer was very helpful!

First set had a factory defect. The hole for the tension knob was not threaded. Replacement sent was also a defect, the mirror panel swivel was un-adjustable. Spend the extra money and get the correct OEM ones for your vehicle.

Mirrors work exactly as intended, greatly improving rear vision when towing our pontoon behind our 2014 Tacoma. Store nicely in the compartment under the rear seat.

Excellent product. Easy to put on. Took them off, put them in my camper storage. Next trip out, when I put them on, I did not even need to adjust them! The mirrors are slight contour and slight magnification, which makes them easy to see. There is virtually NO vibration during travel. (I have had others that shimmied so bad you could not see a thing.) I flip my driver side mirror in frequently to check my mail box, so it is not very stiff. So I ran a small bungee from the clamp to the grill under my hood. Did this for both sides. My driver side flipped in when traveling at interstate speeds, so I put a second bungee on it. Fixed the problem. Allen bolts at top of clamp are rusting after 2nd use. All in all though, I am very pleased with this product and it is well worth the money spent. It is the only product I could find to properly fit my 2011 Toyota Tacoma, because it clamps on the mirror frame and does not rest on my truck mirrors. Great Product!

Good concept but, functionally does not perform. I ordered custom mirrors for my 2024 Silverado which has cameras on the mirror and the slip ons covered them up. Also, the mirrors do not have enough adjustment for me to see the side of my trailer. I thought custom meant that these would take into account the actual equipment on my truck.

When installed they look better than any other add on mirror. The wedge that goes behind the lock screw takes a little time to get aligned, but theses mirrors did not move at all on a 1100 mile trip and did not require any re-tightening. They gave a good view of trailer and I am very satisfied with them.

I would like it to be extendable a bit further on the passenger side. The driver's side is fine though. The passenger side does not let one see far enough away from the side of the trailer. All in all, I like it better than drilling holes into the doors of my pickup to install huge mirrors. These look way better and are sufficient.

Proper fit, I have not trouble putting the mirrors on or off

Haven’t had a chance to use these but did put them on my truck to get them adjusted. Easy to install and look like they will give me good coverage.

The Universal fit towing Mirrors-THis is easy to put on and off and gives great visibility when towing our boat

Installed on mirrors as directed in instructions. Drivers side mirror blew right off

Excellent customer service! The mirrors fit perfectly over our ram 1500! Quick shipping! Very satisfied!! Thanks