Most Popular 2 Bars for 2020 Hyundai Veloster

Purchased for an 8000 mile roadtrip last summer. A perfect fit for our Ford Flex. Easy to locate correct model on etrailer.com website and best price we could find. Install was a snap with good instructions. Great customer support at Thule - totally class company. We used it to mount our Thule luggage carrier as well as fishing poles on the sides. Had minimal effect on MPG. Couldn't be happier with Thule AND etrailer.com.

If an AreoBlade is going to be installed at or near the Rear of a (2014) Ford Flex, the smaller unit (7503) should be used. The Factory Installed Roof Side Rails taper-in from 44.5" at the Front to 42.5" at the Rear. Dual 7504's work OK when installed towards the Front and/or Middle of the Rails. Rep. from etrailer.com (Kelly S.) was super to deal with !

Easy fit on Tesla Model X. Our fitment is for carrying kayaks and the occasional roof box. I would give these 5 stars if SeaSucker had the option to pivot the front mounts 90 degrees to decrease a sloping roof angle. The front mount placement is critical on a Model X as the front glass roof slope/curve means you'll definitely need to moisten the cups and press down firmly while suctioning to get a good fit. Another recommendation is to let the racks sit for 2-3 hours and then check the plungers to see if any have released air (clean and reposition if they have). Repeat the same dry fitment with your cargo attached.

I've waited until I had a chance to install it and test it on my 2017 Mustang before wrote this. Fits perfect and ruggedly built. I thought we would never be able to transport two kayaks but they proved me wrong. Love these Monkey Bars.

We have been very happy with our Rhino Rack system atop our 2018 Chevy Express Van. We carry 2 Kayaks ( sit in style, 14 ft and 12 ft) upside down on the van roof and use some eye bolts and ladder supports with ratchet straps to hold them in place. It took a while to get them( due to being out of stock) but eTrailer has excellent customer service and kept in touch with us on the order status until they arrived.

Crossbars are true and straight. Work perfect for my application. Reliable product. Mounted solar panels to them.

Excellent customer service. First set of crossbars was delivered to the wrong address and a second set was mailed out to us arriving in a week.

Fit perfectly and we're very happy with the roof rack.

These are the perfect racks for a low profile mounting of solar panels on my Sprinter van.

This works great. Very strong and reliable. Holds my ladders with ease. I’ve had it loaded down and done 80mph on the highway no problem.

One bar slid out on our first road trip. The "grip" that it slides into can't be adjusted. I am in communication with Yakima about this as Etrailer said that's the route that I would need to go. Very frustrating.

From start to finish, the folks at etrailer -- and I spoke to several people there, so it was a consistent corporate vibe -- were fantastic to deal with. There were delays in getting my product that were on the supplier side and out of etrailer's control, yet etrailer folks kept me up to date and also worked on a customized solution. My goal was to be able to carry my surfboard on the roof of our 2019 Hyundai Santa Fe to the beach more than 3 hours away. But the particular model we had had no existing racks, no recessed areas, nothing to fix racks to. Not even the dealer had a solution. I was sh*t out of luck. But etrailer hooked me up. The racks did take me a while to put on, but most of that time was fine tuning to reduce “hum” while driving. I’m very happy with them. Thanks to etrailer, I have gone surfing and can go surfing whenever I'd like to.

The only problem I had, was when I watched the video showing how to install the rack, I did not realize that the actual installation process was a lot more complex. For example, the woman who was in the video only showed the installation one rack (I believe itg was the back rack and she gave the width measurement for that one. The front rack was already on the car and the woman neglected to say, "check your manual. The width of the front rack (may be) different than the back. She also did not explain carefully that there were three different screws that needed to be adjusted for a proper fit so the towers were properly adjusted for yoiur specific car. (My car is a 2018 Chevy Volt.) (I also bought Yakima kayak cradles from you guys, which were easy to install.) However, I blame myself for not reading the manual carefully, so when I installed the racks, they did not fit right and one of them actually fell off while I was driving. (Luckily there were kayaks on and no one was hurt. The two towers were damaged but luckily the rack and the kayak cradles were fine. I called etrailers and was told I had to contact Yakima, which I did. I explained to the Yakima customer service rep that I was at fault for trusting the video and not reading the manual carefully and after asking me to send him photos of the damaged towers he sent me two new towers for free, as well as another torque wrench, so I could work with a second person. This time I read the manual carefully and watched the Yakima video many times during the a week before I felt confident enough to try installing the racks again. This time they fit perfectly. I love both the rack and the kayak cradles. I use them to transport my two kayaks down to the Hudson River near my house and have also used them to carry the kayaks to a family camping site 50 miles away, confident they are safe and secure. But please, review the video you put out for the installation of the racks onto a 2017 Chevy Volt, and either correct the shortcomings by doing it over, with an explanation about the adjustment of the widths, and also reading the manual and finding the correct positions for the adjustment screws. (Or delete it and refer your customers to the Yakima installation video. Though it’s more generic than yours, at least the tell the customer to refer to the manual.

Super happy with my purchase from e trailers purchased yakima roof rack. Knowledgeable sales rep.Help me through the process on purchasing my roof rack Recommended to anyone quality parts

The 50” jetstream cross bars were perfect for my 2019 Ford Ranger with my ARE cap. They are paired with the Yakima Skyline towers and appropriate landing pads (protip: call etrailer when you order to ensure you have the correct setup;) These cross bars are SILENT on my cap. Zero wind noise. My daughter and I installed them on a Friday (I do recommend watching etrailer’s installation video in addition to the paper instructions) and left for a 700 mile weekend road trip the next day to pick up a kayak, paddle with friends downstate then drop her off at summer camp. Even with empty Yakima Jaylows on top, no wind noise. Even with a boat in the Jaylows, no wind noise. These are the sweetest rack’s I’ve had. With the Skyline towers and landing pads, they are also easy to take off and put on. Click click done. They look good, too;) etrailer customer service for the win, too. When I originally ordered, I did not order all the items I needed for installation. When I realized this, I called and they got me squared away.

Yakima Baseline with Yakima CBX 18 Cargo Box fitted on my 2012 Toyota Corolla S Sedan 2012. Instructions were clear and roof rack was easily installed.

The rack more than exceeded my expectations. It was easy to assemble and mount on the cap of my Tacoma truck. I was pleasantly surprised by the aerodynamics which virtually eliminate wind noise, even at highway speed. I pirchased the rack as a permanent mount for a 4rod flyrod holder which I use daily for fishing. The Rhino keeps everything “tight and right”. It has worked perfectly for nearly three hundred trips and over 15,000 miles this year.

The Rhino Rack HD crossbar kit for tracks fits my SyneticUSA Pro retractable cover perfectly. RR includes several track nuts of different sizes to match to your particular track. I love the quick detach capability of the towers and that they also lock for security. The HD bars are essentially the same dimension of 1 5/8" unistrut/superstrut so you can find all sorts of attachment hardware outside of what RR makes. This makes it easy to securely bolt your gear down to the cross bars and customize with easy to find hardware at your local home depot. The 65" HD bars are perfect for a mid size truck like my Tacoma.

Easy to assemble and, solidly built. Very easy/fast to mount/remove after assembly. The instructions are not all that clear for assembly of the combined sr1003 sr1116. I hope this photo will help. Note that the rubber feet remain on the back bar that crosses the car, but the hook that goes under the door frame is transferred to the sr1116 front to back extender bar.

The rack was fairly easy to put on, do NOT over tighten the rectangular nuts on assembly. They are easy to strip. There are now backup nuts on all four bolts on our unit. Be careful to assure that the rubber pads are correctly positioned on the unit's "feet" before tightening it down on your roof. It looks good and on a recent trip from CT to TN and back, we got the best fuel mileage we've gotten since we bought our CRV over a year ago so it sure doesn't create a lot of drag! Once mounted it is sturdy and not unattractive although the side clamps do distort the door gaskets a bit which increased the wind sound level a bit. I think it is a good value if you are careful mounting it.

Awesome rack and super easy to install. Great product and the only bike rack I could find that would fit my 2009 PT Cruiser. Awesome experience from start to finish! The product was shipped on the July 4 holiday weekend which is very much appreciated!

I was looking for a high quality roof rack for a naked roof. After much research I ended up with the SportRack #SR1005 with square steel crossbars. The rack fits well, the bars do not bend under weight of my canoe. Very solid, went fishing today!

Bought these and the basket at the same time about a year ago. Both products have been a great addition to the car. Currently running without the basket and the bars look really nice. Good fitment!

Perfect fit, easy to follow instructions, and all the parts I needed to install. Totally worth the price.