# 1
Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector
This product works as expected. There is not too much to the installation, just plug it in properly and mount the ground wire. I did not find an easy way to mount this to my wife's Odyssey, or to the trailer hitch (item# 75270). Luckily, I do prototype design and manufacturing. So I came up with my own solution. I designed and made my own bracket to mount the 7 pole to the trailer hitch. It works like a charm, and looks great!
i had to replace these two items as my dear daughter went down our goat path driveway too fast. they replaced the originals from etrailer from the prior year. shipping is timely and customer service actually helps! i wired from battery to controller to hitch myself, and everything fit.
# 2
Adapter 4 Pole to 7 Pole and 4 Pole w/Test Lamps
Not too difficult to install, but I would recommend using a car lift so you don't have to work from your back (review includes wiring harness and Brake Controller)
Perfect . My new Subaru hitch has a flat plate to which the dealership attaché the 4-flat. I used “2 L-brackets” to accommodate the 90 degree bend of the adapter bracket.
# 3
Hopkins 7-Way RV Style Connector with Molded Cable - Trailer End - 8' Long - RV Standard
Çable good but after putting new 7way plug on truck cable wire colors did not match etrailers picture
7 pin connector separated from cable. I was expecting that "Molded Cable" meant that the connector was fused to the cable insulation but instead, the two separated almost immediately after I installed it. It still works fine as the wires are connected securely inside the connector but with the outer covering pulled out like this, I don't think it will last very long.
# 4
7-Way Molded Trailer Wire Connector - 3' Long
I've had this in use for over a year and they don't build them like they use to. I use this on a gooseneck trailer and the piece of plastic behind the spade connector for the clearance lights and brakes has melted, allowing the spade connector to lose contact with the plug on the pickup. So the lights would cut off in the middle of the night and would have to wiggle the connection till I could fix it. I have an older Hopkins plug and never had this problem. To fix the problem I ended up putting pieces of thin copper wire behind the spade and have done it twice since the plastic melted a 2nd time and once again the trailer clearance lights would quit working. Attached are before and after pictures.
The product works great but the color coding is off compared to the colors on the trailer. I started hooking this up matching all of the colors.( Red on Red, Black on Black, etc.) When I plugged in the trailer in it blew a fuse. So I got online and found out that the Hopkins wiring is different then normal trailer wiring. Overall it works great but the colors should match to make it easier to hook up.
# 5
7-Way Molded Connector w/ 10' Cable - Trailer End
As described. Got this one because of the design of the connectors as I’m troubleshooting an issue with wiring. Colors matched the rv-style one I took off my camper. The moulded plug housing is a little shorter than the one that came on the camper so it doesn’t fit in the little storage thing the same way. Functionally seems great.
I upgraded my trailer from hydraulic to electric brakes and rewired everything to neaten and freshen up things. Its a nice piece. I recommend.
# 6
Pollak Trailer Connector Adapter - Vehicle End - 7-Pole Round to 7-Way Blade
I received this item in a plastic bag, for a few moments i wondered if it was a knock-off. I had done my home work and was sure that this item would be compatible with the socket on my John Deere 2013 5085M at the time I ordered it, not so. The 'holding ridge' at the plug-in end was not in the right position when fully inserted into the plug on the tractor. I sent multiple pictures to Pollack Technical Support but they were unable to assist me. I finally modified the item myself (something I really hate to do) so that it would fit the plug-in and be 'grasped' by the cover/holder on the tractor side. As I anticipated, the thickness of the plastic was inadequate to make the adaptation 'sweet', so I had to cover the resulting hole with silicone caulk.
This is a great solution for adapting RV blade connector to 6 pole connector. I give it 5 stars. I use this for work purposes, and have found one issue that I DON'T believe to be manufacturer defect. In my industry we use different trucks and trailers daily, if not hourly. Some trailer electric brakes will lock up when adapter is connected. I have found the red wire in the adapter to be the problem. My solution was to splice in a switch so that when the intermittent problem arises I can flip the switch and be on my way.
# 7
Hopkins Heavy-Duty Trailer Coiled Wire Adapter for 7-Way to 4-Wire Flat
Works, exact fit, high quality, coils tight so max of about 3.5’ perfect! Heavy duty wiring, great waterproof connections.
Item was just as I anticipated. It looks good, works great, and the delivery was as promised. E Trailer is a good place to do business.
# 8
Adapter 7-Pole to 6-Pole - Universal
We had been having trouble with our other adapters, no brakes or intermittent brakes. This adapter fits better than any of the others ever have, great connection and is holding tight. I will be picking up some more of these. The only downside to me was they came on the value shipping which is rather delayed for us and I would rather pay to get it here more quickly. I was needing it and it was several days getting here. We ship a lot and I know shipping directly with USPS goes faster than that and is not expensive.
Added the gooseneck trailer plug in bed and I wanted to be compatible with new and old style plugs. Adapor worked great.
# 9
Pollak 7 Pole to 4 Way Connector Adapter
I wanted one with a LED tester built into it to "trick" my SUV into thinking I had a trailer connected when really it was just a bike rack so the car didn't slam in it's brakes while reversing thinking it was something else. So I bought a different adapter. The picture slightly deceived me into thinking this had LED tester because the plug is attached by a rubber string (that I thought was a wire). So add another picture of the other side and that would eliminate my confusion. 4 stars because it probably works the way 99% of people would want to use it for.
Everything worked out well. On time and fits perfect. Attach hitch setup and my new Ridgeline. It comes with a 2" inch receiver and I have a full compliment of 1.25. stuff from my previous car. All from etrailer i must admit! so I needed the 2-1.25 reducer, a good lock, and the 7-4 reducer for my goodies! Thanks for the grest service
# 10
Adapter 7 Pole to 4 Pole with Tester and Cover
I have ordered several adapters and complete trailer wiring harnesses from Etrailer. All have been top quality. I have saved a lot of money on the plug and play trailer harnesses. Several hundred dollars when they are factory installed, less than $75 from Etrailer.
ETrailer had exactly what I wanted at a fair price. Website was easy to navigate and purchasing was simple. Shipping was fast and I was kept notified right up to when I received my order.
What our customers are saying:
"In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!"