Best 2019 Ford Explorer Engine Oil Coolers

I bought this engine oil cooler so I could pull my 21 foot boat with my 2016 Ford Explorer. I am very pleased with how it works. It was easy to install even with having to remove the bumper cover so I could attach it to the front of the radiator. I would buy another one if I ever needed to. I would also buy from etrailer again, they have great prices and products.

Installed the Derale engine oil cooler today. Excellent kit installed without any problems. Parts were very complete. I am pleased with the proiduct.

just one problem the sandwich adapter will not fit on a 2008 Avalanche 4x4 the front drive shaft is in the way had to modify

Click to Enlarge

This is a real nice kit. The oil cooler that was in the kit i receive had brackets on each side. The one picture online item # D15405 does not have it. Which was fine because the holes line up with a/c condenser on left side looking at it. Bolted it right on looks like it came factory install. Real please with it so far as lower oil temps down to 200 degrees when under a hard pull. Oil temp before kit was running at the highest was 255 degrees. Highly recommend this kit. The shipping was also fast.

Installed this product on my 2013 Ram 5.7 Hemi. Install was simple and straight forward. I hoped there would be improvements in the operating temperature of my engine oil, which there was. Now towing my trailer is no worry about engine oil temp. This cooler works exactly as advertised, and the temp never go above 220. An unexpected result was better gas mileage by almost 2 additional miles per gallon. Also the truck runs much quieter than before and smoother. This noticed by my wife who rides with me always. So I would defiantly call this a win win install and purchase.

I purchased this kit 1 year ago for an 08 Toyota Highlander V6 Sport. The vehicle had a small (and I mean small) trans cooler already installed with the sport, but adding this additional cooler gives us the piece of mind an confidence that when either towing or evening just sitting in temps up to 116F at the drive through in SoCal during summer hours, my family will stay cool. The fans run less and the whole vehicle runs a bit cooler as well. I have verified this with 3rd party OBD readers, actively watching oil temps both at normal operating temps, hill climbs, towing, and when sitting in extreme heat. IT DOESNT BUDGE! I dont have enough good things to say about this cooler. If youve ever thought about it, you should do it. Very easy to install and it flat out works.

I bought this engine oil cooler so I could pull my 21 foot boat with my 2016 Ford Explorer. I am very pleased with how it works. It was easy to install even with having to remove the bumper cover so I could attach it to the front of the radiator. I would buy another one if I ever needed to. I would also buy from etrailer again, they have great prices and products.

Save your money. Two big problems. First, the sandwich plate adapter continues to work loose causeing an oil leak. I've removed the filter and retourqed to Derale specs a couple of times and it eash time after a couple of days it starts to leak again. Derale tech support was not at all helpful, they said, hmmmm, maybe tighen it a litte more, which I did, and it didn't help. Second issue is this cooler is very small, I installed it on a Ram 1500 5.7l and it made no noticable difference in the engine oil tempure when towing. I considered buying a larger cooler core and asked Derale tech support for some sizing guidance and their best response was put as big a one as will fit. Lot of science going on there. Couldn't give me any information regarding input and output temps vs flow, sizeing guidelines by displacement, nothing, no data of any kind seemed available. I'll make one more attempt to reseal, retighten, try a new o-ring etc. It doesn't work it's coming off and going in the trash. Overall the kit is sized for a very, very small application, maybe your riding lawn mower, that should be indicated. On a full size 1/2ton pickup this does next to nothing for your oil temp. Unfortunately tech support from Derale was no help whatsoever and showed not interest in helping trouble shoot or solve the problem. Very disappointing, I'd look else where.

It has been 1 year now. Here is the story. Dodge Ram 1500 5.7 w/3.92 gears. Oil temp at speed with no trailer: 224 Oil temp at speed with Springdale Mini RV: 240 (backed off at that point….it would have kept climbing) After the install: Oil temp at speed with no trailer: 200ish. With trailer 210-220 Before I did this, I had to keep it at 55 in the expressway to keep my oil from turning into charcoal. Now I can drive normally. Only at the hottest part of the summer on a long grade did I ever brake 230 and it cooled right back off at the top of the hill. Also holds about another quart of fluid which I like from a wear/tear perspective. Even if the temp wasn’t an issue this kit would be worth it to move the oil filter to a non-retarded spot. I opted to go with the frame on the right side. Can change filter from side if wheel is turned. Very nice.

My vehicle is a 2010 Ram 1500 5.7 Hemi 4x4. Overall product is great, those Conti hoses are awesome and little hard to get on lol but only issue I had I couldn’t retain my factory mopar oil filter which isn’t a big deal I got a WIX filter that fit. Thanks for quick shipping and great product! Will be buying a transmission cooler from you soon!

Click to Enlarge

just what i needed easy install nice quality

Click to Enlarge

Click to Enlarge

This is a quality product and performs great. Installed on a 2012 Toyota Tacoma and had to have some machine work accomplished and a change from the original oil filter. Installation was straight forward after those issues were resolved.

I bought this engine oil cooler so I could pull my 21 foot boat with my 2016 Ford Explorer. I am very pleased with how it works. It was easy to install even with having to remove the bumper cover so I could attach it to the front of the radiator. I would buy another one if I ever needed to. I would also buy from etrailer again, they have great prices and products.

I am extremely disappointed in this product. Installation has been a nightmare, even being someone that has automotive experience. From etrailer.com's recommendations to other customers I purchased this oil cooler for my 2010 Dodge Journey. DON'T! Unless you have access to some way to make a custom mounting bracket mounting is impossible. This CANNOT be mounted using the supplied method due to the stock cooling fan mounting shroud. After making my own mounting brackets from aluminum this cooler has done nothing but leak. It uses adapters, attached to adapters to make the connections to the tank, they leak. To attach the lines to the sandwich plate the instruct you to use teflon tape, or a similar sealant. With the temperatures and pressures involved keeping this from leaking took several attempts, not to mention oil sprayed all over the underside of my vehicle, including my brakes, and the front of my brand new trailer. Overall a very, very disappointing experience with this product.