Most Popular Lippert for 2017 Chevrolet Silverado 2500

Freight co delivery estimated for Friday, arrived today. (Tuesday). Borrowed a tractor, dropped the old and lifted this monster into place. 12- 15/16 bolts (originally) 18 hole mount. Not sure if the height is correct for the bed, but will adjust it down if after the rubber bumper is inflated, if it doesn’t sit level. The bolt pattern was correct. better get help! From dropping the MFG lippert, to getting the thing lifted an bolts snugged up, about 45min. Will take a bit longer to attach the deadman switch and electrical box. Well crafted, definitely heavy. This should save my truck n RV from porpoising damage as I’m going over Bridges and bad roads.

We're so anxious to try out our new Curt TrailAir. Installation went smoothly, it looks great. We can hardly wait to experience the ride!

Smoothest ride that I've ever had with a fifth wheel trailer

Easy install and definitely a beefy king pin.

the fit was perfert. as you can see from the pictures is attached, i drilled a hole in the top to drain water that collects. i fabercated a cover to fit over the opening.

Best ride I ever had.my 42ft.RV rides like floating on a cloud.

Hannah did an excellent job of working with me to find the correct upgrades for my towing system. 5 stars got her. Tge package arrived with the king pin poking through the box and having deep scratches. I think it will function ok. 3 stars for those handling shipments and deliveries.

No bucking and jerking has made for enjoyable RV experience this year. One of the best investments I've made in our RV. prompt handling and shipping from etrailer made it even better!

The order was delayed while etrailer waited for it to be built after I ordered it. Shipping was slow and the product sat on the truck dock in Denver for at least one day before being transferred to the freight company for delivery to Casper. The local freight company was good to deal with once it finally got Casper and I picked it up on their dock. Removal of the old pin box went smoothly, but there were absolutely no installation instructions for the Curt Flex Air pin box and there were none on the internet. The online video was no help, either. Finally got it installed after too many hours. I DO NOT understand why the new pin box has raised the nose of my 5th wheel by over 2 inches, so now I have to work on the hitch and lower it 2 inches. Will be glad when this is DONE tomorrow.

My wife and I are very pleased with our purchase of this product. We have taken numerous trips with our rig since installing it and what a difference it has made from the standard basic pin box. We no longer feel any chucking from starting off and stopping when towing our trailer. I figured it would definitely reduce it but it eliminated it completely. We tow with a one ton F350 long bed SRW and a B&W hitch. In my opinion It is not a DIY installation because of the sheer weight of the product otherwise I think that it would be. It is not a complicated item to install its just super heavy. In addition to my praise of this product, I would like to recommend the addition of grade eight hardware to be included with the product for installation. I think a few dollars more for the price should more than cover that cost. When it comes down to it the grade five hardware is sub standard for such a massive object in my opinion. It is supporting not only the weight of the pin box but the torque under load as well so for the purpose of safety, which is why we purchased it in the first place the hardware has to come off anyway to take off the old pin box. So why not replace it at the same time. My two cents worth anyway. I would definitely recommend this product to others who are looking to eliminate the chucking felt under a standard fifth wheel pin box.

Excellent quality perfect fit and easy installation haven’t towed with it yet but coming soon.

We used to have a lot of slop with our hitch and that has lessened immensely since our purchase of the MORryde pin box.

Parts where on back order per information given by my 2 other vendors etrailer had it in stock and arrived on time before original ETA As a owner of a small business etrailer is great to work with and always helpful.

Sidewinder worked great for my short bed Ram. Be sure to get the matching wedge for your hitch. Thanks etrailer. I will be using you for all my trailer components

Delivered intact.

Replaced Rhino with this unit on my Cedar Creek 311RL. It was straight forward and simple, but not easy for this old man to do it solo. Used the tailgate as my shop. Stuck the back up in the air and drove back to insert into the bracket. I then used the levelor on the trailer to line up 2 of the holes to insert the first bolts. I used a car jack near the pin to raise the 230 pound box into line up position to insert the other 8 bolts. Torqued it down and aired it up, then test drove it. Rides like a dream. Much softer on those in the tow vehicle and I assume on the fifth wheel itself. Service from etrailer was good. The advice and recommendations for my specific rig was a little off. But I was able to do research myself. Shipping was timely. Over all another successful etrailer transaction. Thanks to everyone.

Very satisfied with the purchase. E-trailer is great to do business with and the product was great. Easy to install with 2 people but I got it done by myself with the use of my tractor to hold in place while mounting. Improved the ride while pulling trailer. Just what I was hoping for. Pin box is very good quality. No regrets.

Hitch king pin box was a perfect fit and installed easily. I just finished hauling the trailer with it on a 5000 mile trip and it worked flawlessly.

First time using etrailer so I wasn't sure what to expect. But they were fast, efficient and keep us updated throughout the shipment. This was a replacement part for a customer shipping their cargo on us to Nome and it had to get here on time, very pleased with the service and follow through. Thanks Tom

Appears to be able to meet my needs. The unit arrived as schedule however the shipping box was damaged which was no fault of ETrailer but rather the shipper. Will be installing next week.

My pinbox was delivered in two days and JT took alot of time working with me to make sure to pick the exact matching pinbox that I have on my trailer. I am very happy and would definitely recommend etrailer for you RV needs...

So far this is a welcome upgrade. Took it on a short trip over some rough road that normally triggers chucking on my F-250. This pinbox prevented it which was a welcome change. I’m looking forward to some longer trips. Installation was straightforward. Removed the old pinbox which was fairly easy. Installing the new pinbox would’ve been a challenge had my buddy not had a forklift attachment for his tractor. I don’t know the exact difference in weight between the old Lippert pinbox and the new Moryde, but it is substantially heavier. I’d say 2 people muscling and one to install the hardware would still be a challenge. Forklift or similar is the way to go. Also, the new pinbox doesn’t come with new hardware. Got to use your old or make a trip to Lowe’s/Home Depot. All and all I’m happy with the upgrade, but I thought it was pricey and don’t like the additional weight.

This cushioned pin box is definitely worth the upgrade. Chucking is greatly reduced (There's no getting totally away from it) and the frequency of the chucking is tempered making the ride much more pleasant. There are times when you forget your towing it's so smooth on decent stretches of road. Delivery was quick (3 days early as a matter of fact) and driver dropped it in my garage. Plus the fitment was perfect, bolted on with no problem. Entire experience was good !!

I haven't tested it out yet, but I can't wait! I have friends that just marvel about this pin box.

It's a great pinbox. Really helped with chucking and compatible with my Demco sliding hitch. Also no issues with delivery, was helped by Pam and Jessie. They are awesome people to work with.

I have had many coach's with this hitch, that is why I am changing out the one currently in the coach to this. UPS delivery sucks. Box was misrouted to another terminal after arriving at the facility near me. Caused an extra day's delay in delivery. When box did finally arrive it was virtually destroyed and driver claimed box showed up open and that they had to retape it this morning ING before delivering it.

We have gone over 2000 miles and the MoRyde Cushioned 5th Wheel Pin Box fot the Lippert Rhino and it works great!! What a difference it made in pulling my 5th wheel trailer!! It was the best investment I made for my 5th Wheel !! Easy to install if you’re handy! I would highly recommend this product!!

Ordered the Morryde pin box to replace the Rhino pin box on a 2022 Riverstone Reserve. Shipping from Etrailer was right away but had a little delay with the shipment because the semi truck could not get up my road. Taking off the Rhino pin had a little trouble as one of the bolts was cross threaded, which I have read from others also having the same issue. The Morryde came with all the hardware and with two people had it changed out in about an hour. Took it for a small drive and really seems to make a big difference, will get it out for a longer drive soon on my next trip. The new pin box went in the same position as the old one and did not change my level or bed clearance.

I have not installed this part on my 2021 momentum 395MSR yet, but it was received in perfect condition. I had the same pin box on my Solitude390RKR and loved the way it handled. If the part does not perform as expected once installed and after I have some miles behind it i'll update my review.

Installed this MORryde cushioned pin box on a 20K# toyhauler(from a solid pin). Comparing 9K miles before and 11K miles after, it made a remarkable improvement in the ride, especially on choppy, rough roads (think I-40 across New Mexico). Easy bolt-on installation. I consulted with the staff @ etrailer.com to ensure the correct hitch model was selected. Shipping was straight forward via truck freight. Excellent communication through the process.

My original king pin failed so with the help of etrailer's (Stacey A) amazing customer service we found an exact replacement. It was easy to install with instructions and girl power!! Thanks etrailer for your help.

Perfect fit, went on easily! Thanks etrailer for all your assistance!!!

The product is exactly as described and as shown in the pictures

When I got it, there was like eight or nine scratches the bracket that hooks to your camper that hooks to the plate the lip that bends over was bent up so I had to use a hammer to knock it back down and a couple other places where it was looks like it’s been dropped It’s far from his heart, but it don’t look the best.

This Pin box bolted directly into the camper pin box mounting plate. Best of all the longer pin box added more than enough length to the system to allow the our 5th wheel to be connect to the truck with the tailgate in the lowered position. The only negative is that the description of the item stated that the pin box is powdered coated to prevent rusting. The item came with plastic wrap on it and the powder has multiple areas where the paint was chipped.

For those of you who, like me, may have purchased a truck with the under the bed rail system for your fifth wheel you know the positioning of the rail system is set in front of the rear axle instead of directly above the axle making the distance between the cab and trailer that much closer. This can cause a problem hooking up with your tail gate in the down position if you have a medium length pin box on your trailer. etrailer has a great chart online to help you determine what kind of pin box you have and if there is another one manufactured that will fit in the same place. This longer pin box for me was a great economical, safe solution. The Lippert 1716 long box is a direct replacement for the Lippert 1116 medium box, but is seven inches longer giving me the needed distance to hook up.