# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Great quality product, item exactly as described. Quick shipping, prices are good. Easy to follow instruction videos on the website. I highly recommend etrailer.com for any trailer related needs! Ian, a very satisfied customer
It is what it is. It's cheap, but does the job. Made in China.
# 2
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.
# 3
Brophy Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 13-1/4" Long - 10K
I’m pleased with the product and how prompt the delivery was. However the packaging was insufficient and the packaging was torn open all over. Scuffing of the finish is a result and of little consequence due to the intended use. It’s a stinger w/ball for motorhome. May I suggest better packaging in the future
I like the extra long length. No one else make a hitch this long.
# 4
Curt Pintle Hook with 2-5/16" Ball - 2" Hitches - 12,000 lbs/16,000 lbs
The customer service and the timeliness in which l have received my orders from etrailer.com is second to none. I needed my hitch to arrive on time so I could pick up a nice chunk of Sycamore. A bit of electrical tape on the shaft to eliminate "play" in the receiver, slip in the new lockable SS pin from Bulldog and off we went to pick up my prize! What a great company to do business with!
Solid 2-5/16" hitch. The recesses let water by so the hitch won't rust up in your receiver hitch and will be easy to get out. I bought this as a spare, but after receiving it, I will be using it as my primary hitch. I originally bought it to put in my trailer spotter on my skidsteer to move trailers around without having to swap the original hitch from the truck.
# 5
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 9-3/4" Long - 2K
The product was exactly as advertised. I would recommend perhaps having an additional hole drilled closer to the front for the key to go thru as it sticks out very far from the car (a Lincoln MKX)
This is a great product. I really appreciate the quality. This was also a car I was having difficulty finding a trailer hitch for. So thanks again for a good product.
# 6
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
The product was exactly as advertised. I would recommend perhaps having an additional hole drilled closer to the front for the key to go thru as it sticks out very far from the car (a Lincoln MKX)
Excellent customer service & support! Bought for my 2013 Honda Fit and plan to trailer my Yamaha Tenere motorcycle around North America! Very happy with hitch.
# 7
Curt Class I Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 2,000 lbs
Great product, delivered on time.
I have a 2022 VW ID.4 AWD with factory installed receiver. This drawbar is 1/4" longer than VW recommends, but in rise orientation the length is required to clear the bumper. I ordered a shorter Curt drawbar but found it could not be installed in rise orientation because it hits the bumper before the pin hole is aligned. Both the shorter and this Curt drawbar fit fine in drop position, but were very tight in rise. I had to sand down the paint and file the corners to make the Curt fit easily so that it could be inserted and removed from the receiver by hand. I can't say whether this is a VW or Curt issue.
# 8
Curt Class I Drawbar - 2-5/8" Rise, 3-1/4" Drop - 6-1/4" Long - 2,000 lbs
Great product, delivered on time.
The drawbar being hollow in the male end seemed to be too large in diameter to fit the female receiver on my car's fairly new hitch. I had to hammer the drawbar into the hitch. I doubt i will ever be able to remove this drawbar without destroying what it was hammered into. While drawbars with solid male ends easily slid in and out of my car's hitch. I'm not pleased.
What our customers are saying:
"It was a great experience."