Most Popular 4000 lbs Vertical Load for 2007 Ford F-150

I very much appreciate the expedited shipping and the follow-up. Appears all made it in good shape. Have put you guys on my favs along with Harbor freight, Home Depot, Cabella's, and Big 5.-----Tell more when installed. Will only use on occasion at Tree Farm.

This is a very good replacement of my Reece 1500 and this company did a great job getting this new hitch plate out to me in just a few days thankyou George and staff

Right on time I like that Like how you notes time and team membe Been to 45 stateside my 5th wheeler Twice to Alaska 5,600 miles on the Alaska I ts self

My current bw companion says on it that you can not use it with the sidewinder. Used the chat to get info on using my existing sidewinder on my new truck. The person from etrailer built me a cart with everything I needed. Except it's not compatible. I have a Ford with the factory prep. They told me there was no way to use it. I got the rail system they recommended only to find out that it doesn't work. Also this wedge they recommended doesn't not fit the sidewinder. Just buy local and save the headache. Now I have to schedule a Ups drop off and leave work early to bring 300lbs of boxes to ship back.

This can be easily put together and installed by one person. I had to put the base into the universal rails loosely and then torque the bolts to spec. This hitch was an upgrade.from the autoslide hitch I originally purchased for my 5th wheel. The noise and banging has disappeared. This hitch was well worth the money. I also purchased the custom fit wedge for my pinbox. I don't believe I could be any happier with this hitch.

This hitch is has certainly served its purpose. Easy to use and reliable. My only complaint is that I can't seem to separate the hitch plate from the base. I thought it would be easier to separate the two components.

Putting the hitch together was easy following the instructions, it seems to be was built...time will tell. I only used the hitch one time for only a 60 mile tow...hitching and unhitching was a breeze

Extremely satisfied with B&W Patriot hitch. Easy to hitch and release. Like it better than Reese I had. E trailer made it easy to order and was shipped promptly to my home. Will do business with them again.

GREAT GREAT GREAT EXPERIENCE AND EVERYTHING THAT GOES WITH THIS WEB SITE.....PRODUCT TO PRICING TO SERVICE.....

The first shipment had wrong parts shipped with four slide mounts that were damaged (loose foot, gouges, damaged label, etc.) and no header or cross bar. The second replacement shipment had missing bolt, pin, and rubber parts from an obvious previous return where the customer had cut open the parts bag and the parts were all loose in the box with some going out the holes during shipment. The header and cross beam were also gouged and scraped up. The boxes that were in really poor condition heavily taped, holes, and falling apart - obvious returns instead of a new hitch we were buying.

Easy to install, great quality

Doesn't operate as easily as I hoped. Sticks when trying to slide which means jumping in and out of cab many times. Also its heavy as it should be,but it doesn't come apart easily for removal in two pieces that can be lifted separately. You need a winch to remove it safely. Its a pain in the you know what. I like my old two piece hitch better. I could take it in and out in a few minutes, but it won't work in my new f350.

Curt A16 with Slider base for Ford OEM Pucks I went through a good bit of anxiety after trading my 2013 F-250 for a 2018 F-250 due to the height of the 2018. I did not pay close enough attention to bedrail and rear height and I was beside myself sick over it so this review might be a bit long while I explain my journey. I replaced a 2013 F-250 4WD with a Reese Pro Series 16K square tube slider universal mount with a 2018 F-250 with OEM pucks. I pull a 2015 Prime Time Crusader 315RST. I measured, I had boards with levels, mock up on hitch height, I read every forum and article I could find and still I was worried I had made a big mistake. Finally, I called eTrailer and talked to Molly and she had, (or went and got) plenty of answers as I had narrowed it down to the B&W BWRVK3370 20K Companion Slider and the Curt A12. I decided to not go for the “the most expensive is better” and went with the Curt A12 saving me about $300. The 20K B&W was the smallest they had and with an F-250 I would never really come close to that weight before I passed the GCVW limit so it made no sense. The Slider base for the Curt says it is the same base used up to 24K so if I ever do I can just buy the new head I believe. Ordered on a Saturday it arrived on Thursday at noon. No issues with shipping at all, the hitch came in 2 boxes strapped to a pallet. No damage like others experienced. Assembly took me about an hour because it is heavy and awkward to line up the slider linkage but all in all nothing too difficult. I set the hitch head mount at the 2nd from the bottom (18 inch) hitch height because I had measured the truck and camper and was worried about having 6 inches of clearance camper to bed rail. Turns out on a 2018 F-250 4WD at the 18-inch level on the hitch I have 8 inches all around and 7 inches at the highest point on the tailgate. After I installed the hitch and put the camper on the truck and applied weight I got about 3-4 inches of squat, which made the already rear high truck sink to near level. I do have more nose high attitude on the trailer than I had before but it was not terrible. I moved the height adjustment down to the 17 inch (lowest) today to lessen the nose high attitude by another inch and I have 6+ inches clearance still. The hitch. Like I said before I had a Reese Pro Series 16K slider and it was noisy as hell. Kingpin clunk starting and stopping, creak at every bump and turn. I put the Curt A16 in and took the trailer for a drive with the rear slider window open and heard nothing. Absolutely nothing. No start/stop clunk, no creaking, nothing. Hook up was very easy and the interlaced kingpin jaws make visual check very easy. Operating the slide takes a bit more effort but it worked fine and locked securely. It did not latch back to maneuver and then back again to towing automatically like the video without jostling the handle a little but I am sure it will once broken in and I grease it a bit more. The puck system was easy to adjust and make a solid connection to the truck with no play. I could not be more pleased with the hitch. Cons- The hardware was packaged like one would expect and it was all there but the bolt for the center connection of the slider linkage was different than the handle and passenger side joints. It is too small and caused a lot of play. I used it anyway but it allows play in the handle and not firm for unlatching. I will replaced it today and now it works great. eTrailer is now my go to store for trailering supplies.

2017 F250 curt A16 slider Ford prep package

Etrailer description failed to mention that this would not work with a B&W OEM prep ball. They did have a recommendation for a ball so add $[XX] plus a month wait for the ball that works.

I like it’s design and how it sits in the bed. It seems to want to rotate some while pulling. I see some reviews that other people are having this problem also. Some have put a bolt down through the base into the truck bed. I haven’t wanted to do that as of yet. Otherwise I like the hitch.