# 1
20x47 Reese Cargo Carrier for 1-1/4" Hitches - Steel - 300 lbs
This is great cargo basket: solid and secure, easy assembly, well designed. The angled neck keeps the basket well away from the ground; I haven’t had any problems with it bottoming out. My first use was actually on a trip back from Florida following Powered Paragliding training. I was intending to bring back just a Paramotor (which would have stood vertically inside the basket), but ended up bringing back a whole Trike assembly! Mounted it on the basket as shown, and it rode just fine back through four states. Got a lot of looks on the way home! I concur with an earlier reviewer that a neat trick is to use a stabilizer strap from the hitch to the corner of the basket. There is plenty of slop in the receiver when the neck is inserted, and a short ratcheting tie down cancels the rattle effectively. I’m very pleased with this purchase; and while I don’t plan to haul around anything as big as that trike, I look forward to many more years of use from it!
First look - not yet loaded up. Ordered this because the less expensive Curt (C18110) was out of stock. It seems like a worthwhile upgrade anyway, with rounded corners and better tie-down options. Finish seems high quality. Significant play exists in the hitch receiver (Curt C11276 - gap visible in photo) to the point that I ordered a hitch immobilizer and don't plan to test the carrier with a full load until that's installed.
# 2
17x46 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 500 lbs
I've been using this Cargo Carrier on my 4 Runner Venture for about a year now. I Purchased this item to haul extra gear to Nags Head from Northwestern Virginia. Installation was a breeze and it's very, very sturdy. I had two Yeti coolers packed with ice and drinks and there was no wobbling at all. I'm a 197 pounds and I was standing on it after I installed it just to check for durability and this thing is a beast. I also used this as a rod holder while on the beach and I caught a 6 foot black tip shark. Overall, I'm very pleased with this item and I would recommend to a friend.
This is a substantial, well-made product at exactly the size I needed - smaller than many, and with sides that keep items secure. It was very easy to assemble, with all parts included and clearly sorted, and with all pieces manufactured to cleanly align. The item arrived promptly, packed to protect the shipment but without waste. I highly recommend this for anyone looking for a high-quality cargo carrier.
# 3
19x47 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 300 lbs
This cargo carrier worked great. Used it to move a rototiller, 2 hour trip. No damage or deformation to the carrier despite the tiller being near the top of the weight limit. The hitch bolt held the carrier firmly in place. It doesn't come with the lights, I installed light kit Item # 52014. Just had to drill four small holes (I knew this light kit wasn't specifically designed for this carrier, just wanted something cheap). Works great on a Town Car, lots of ground clearance. I'm very happy with this product.
This cargo carrier is sturdy and works well on a Mazdaspeed 3. The rise and slight angle make it so clearance is not an issue. The carrier is very easy to put together. I did install the 8 bolts through the connecting plates in reverse of the instructions so cargo would not be scratched or torn. It adds so much cargo space for our growing family. The only drawbacks are a lack of license plate frame and reflectors which are easily added with very little cost. I used a Cruiser license mount plate with zip ties and Reese DOT approved reflectors. I don't plan to use the carrier at night but there are many license plate lights that can be added as well. I also purchased the Rola carrier bag for hauling luggage and other indoor items.
# 4
Ultra-Fab Dirt Bike Carrier for 2" Hitches - With Ramp - 77" Long - 500 lbs
I can't say I'm entirely happy with my purchase. The instructions were more confusing than helpful. Note in "instruction.jpg" photo of STEP 1 that the text says to put the 8 small bolts in from the inside first, but the drawing clearly shows them as going in from the outside. The last step says to place the ramp onto the receiver as shown.... glad I didn't throw away the box because there is no drawing that shows ramp installation. Actually, the photo on the box was more helpful than any of the instructions. Also, I need to make a trip to the hardware store to buy longer medium bolts because the ones that came with the carrier were not long enough to fully engage the self locking feature of the nylon lock nuts. At a minimum a couple of threads should protrude beyond the nylon. See photo "nut.jpg". The bolt threads don't reach the end of the nylon, so the self locking feature is not fully engaged. I did tighten the nut, but that was as far as it would go. I think once I get back from the hardware store with the new medium bolts and after I reverse the 8 small bolts (I followed the drawing and not the text of the instructions), I'll be OK with the carrier.
"Instantly Get Rid of Wobble and Upgrade With Lights" This is not a 5 because ramp should be longer & there should be some type stabilizer to temporary hold bike while strapping down, I'd pay more for those upgrades. The wobble can instantly be solved by hooking Tie-Straps closest to vehicle directly to the receiver where you hook your chains, rather than hooking them to the provided holes on carrier itself. You of course use the provided strap holes ones on the opposite side. When strapped down as stated, the carrier now becomes one with the vehicle & @ 80mph there is no wobble. (*TIP: Put ramp back in its place before strapping down or else it won't fit with the strap hooks in the way.) I upgraded mine with lights for both safety reasons & not needing the Police any reason to pull me over. It was very simple and cost me nothing but time & maybe $50. I recommend this product whole heartedly.
# 5
24x60 Reese Cargo Carrier for 2" Hitches - Steel - 500 lbs
The rack is much bigger than my previous one. I was disappointed that it was made in China instead of the USA. It assembled very easily and the light kit works very well. The only draw back is I can no longer open my tailgate with the rack installed due to the spare tire hitting the raised rack.
This a very nice hitch rack. Well built, lots of space, long hitch tube works very well with Jeep Wrangler JL spare tire, however, you will not be able to open the swing tailgate with the rack on. Its not a big issue as it provides a good amount of clearance to the ground. If you use this carrier with one of the hitch rack cargo bags, it really adds to the cargo capacity of the rack. I have been very happy with this rack, I also like that you can add additional tail/brake lights to the rack.
# 6
24x60 Curt Cargo Carrier for 2" Hitches - Steel - 500 lbs
We just installed our carrier. We love that this is going to free up a lot of space for our vacation traveling. Very heavy duty and bigger than i was thinking it would be.The pin that holds the carrier in the hitch was not included. It would have been an added bonus if it was.
This cargo carrier fits perfectly behind my 2023 CR-V. I use it for hauling bags of grass to the yard waste. It is almost a two person job inserting it into the receiver though. Seems well made and well finished.
# 7
20x59 Curt Cargo Carrier for 2" Hitches - Steel - Folding - 500 lbs
Great design and sturdy. I got two hitch pin stabilizers for hitch and folding pin and it worked awesome. I use it for storage for cab over camper and the carrier fits flush with open tailgate. Carries generator water fire wood and I use it as a step to get into the camper.
Bought for my 2020 XC 40. I’ve taking it on several long distance hauls and it’s frees up a lot of space inside the car. I love that you can open the trunk and get items while having the carrier on. The car handles very well with is on. However I would suggest you buy a hitch stabilizer to stop rattling it make the car a carrier act as one. It folds up when not in use so nothing sticking out when not in use.
# 8
19x59 Curt Cargo Carrier for 2" Hitches - Steel - Folding - 500 lbs
Great cargo rack. Easy assembly! Will work excellent for transporting our Honda EU 3000 inverter
Extremely satisfied with the DrawTite front hitch and Curt Cargo carrier. Everything fit perfect and an easy install. Thanks.
# 9
Yakima EXO Swing Away Storage System w/ 2 Enclosed Cargo Carriers - 2" Hitches
Very interesting! I am pleased with this purchase. All of this equipment is well built and was designed with ease of use and security in mind. The hitch part is surprisingly pretty heavy, but once it is connected this weight gives the hitch a sturdy feel. The lockers are pretty big and the material though light weight feels like it will hold up to some rough miles and a few bruises. It is so nice to have this much dry secure and easy to access storage outside of our vehicle. Customer service was excellent and delivery times were surprisingly short.
Very easy to install. Total installation time (not counting taking photos and opening boxes) was approximately 15 minutes. The only issue I encountered was the left handle on the lower rack had a broken piece inside the locking pin assembly. Other than that, everything was quick and smooth for a single person job. This will greatly assist my business by allowing more room for passenger comfort on long trips to and from airports with a large party. Looking forward to putting this to use.
What our customers are saying:
"Thank you for a great product. I ordered a Rola basket and cargo bag, and am very pleased with the quick delivery time. Everything showed up as expected. A+ shopping experience."