# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Great product. Great service.
We are extremely happy with trailer hitch and accessories that we ordered. Shipping was very fast and the product was as advertised and took about 30 minutes to install. Thanks for your good service!
# 2
Curt Forged Ball Mount for 2-1/2" Hitches - 1/2" Rise - 2" Drop - 20,000 lbs
Excellent product great performance have putting it to work towing 10k no problem love it
Well finished and fits well in my 2014 Silverado 2500 HD. Arrived without delay in good packaging. Don't forget to order a new pin, and lock. This is a 2-1/2 inch ball mount, and pins and locks for 2 inch devices are too short.
# 3
Draw-Tite Ball Mount for 2-1/2" Hitches - 1-1/2" Rise, 3" Drop - 10" Long - 18K
Top notch super heavy duty solid Class V 18000# 2 1/2" hitch with 5" drop. Has some weight, but easy to heft with recessed sides. Married this with a 2 5/16" Brophy raw hitch ball. This is overkill for a 7,000# GVWR trailer being pulled frequently by a 2014 Chevy Silverado 3500HD 4X4 Crew dually with 2.5" stock receiver. Has also occasionally pulled several 6,000# wagons to the elevator. Have no major complaints, but there is a slight variant in size of about 1/16" mounted in the 2.5" receiver so there is very light feel when pulling empty. The 5" drop seems to work the best. This is the second hitch purchased for quick change out. Couldn't be more satisfied.
I buy items from etrailer a lot and I have yet had an issue with any of my purchases. This ball mount fits perfectly in my hitch receiver and allows me plenty of weight capacity left. No rattle, fits firm and the drop and rise makes towing any trailer easy.
# 4
Convert-A-Ball Ball Mount for 2-1/2" Hitches - 3/4" Rise, 2" Drop - 18,000 lbs
well over the hitch is very well made. The hitch itself fit great all holes lined up fine.The only problem the flat round washers were to small for the bolts supplied and you should supply washers for the bracket that mounts under the bumper because the holes on the hitch are pretty big , its possible for the lock washer to seat crooked. A trip to the hardware store fixed the issues. Overall were very happy with the hitch.
Looks welll made, but have not used them at this point.
# 5
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
well over the hitch is very well made. The hitch itself fit great all holes lined up fine.The only problem the flat round washers were to small for the bolts supplied and you should supply washers for the bracket that mounts under the bumper because the holes on the hitch are pretty big , its possible for the lock washer to seat crooked. A trip to the hardware store fixed the issues. Overall were very happy with the hitch.
Looks welll made, but have not used them at this point.
# 6
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Ordered this for Silverado with roll pan and flip down plate. Good quality and fit . Will use this company on next trailer hitch purchase !
The items came very quickly, before I even expected them. The quality looked good on all items. I have ordered from etrailer before, and will continue, as needed. Thanks etrailer for terrific service!
# 7
etrailer Ball Mount Kit for 2-1/2" Hitches - 1-1/2" Rise or 3" Drop - 18,000 lbs
Arrived as promised. My Eagle boat trailer instructions state that the centerline of the ball should be at 18-20" for best effect. You should know that with the 3 inch drop, the centerline of the ball is exactly correct for my 2014 Chevy Silverado 2500 HD crew cab. As an aside you should know that Masterlock receiver lock 1469 DAT does NOT work on the 2014 Silverado 2500 HD 2.5 inch receiver. IT IS TOO SHORT. Even though it is advertised by the manufacturer as "extended reach," the advertising is false in implying that it will work on a 2.5" Chevy receiver.
We use 5 of these for our business and they work well.
# 8
Curt Heavy Duty Forged Ball Mount with 2-5/16" Ball - 2" Drop - 15,000 lbs
Exactly what I needed to pull heavy loads
Good price and fast service
# 9
Convert-A-Ball Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 14,000 lbs
well over the hitch is very well made. The hitch itself fit great all holes lined up fine.The only problem the flat round washers were to small for the bolts supplied and you should supply washers for the bracket that mounts under the bumper because the holes on the hitch are pretty big , its possible for the lock washer to seat crooked. A trip to the hardware store fixed the issues. Overall were very happy with the hitch.
Looks welll made, but have not used them at this point.
# 10
Curt Heavy Duty Forged Ball Mount for 2" Hitches - 1" Rise - 2" Drop - 17,000 lbs
The one foot ball mount works great on a 2014 Chevrolet Silverado work truck(no lift kit). We use it for a one axle, lawn care/utility trailer. It is used at least half the work week and has held up for a year. It may not be a good choice for a heavier trailer, but at that point we would also purchase a 2500 truck too. The mount helps clear the jack when the tailgate is opened with about 2 inches to spare.
This was purchased for towing a 7k GTWR utility/landscape trailer with my 2018 Chevy Silverado 1500 WT 4x4. I measured for necessary drop before ordering, and the 4" drop is darn near perfect. It's a great help that the 2-5/16" ball comes complete, installed and torqued properly at the factory. Appears to be quality construction, fits and functions perfectly. I have no complaints or issues.
What our customers are saying:
"very easy to shop"