Redarc Manager Alpha50 Battery Management System with Lithium Profile and Color Display - Bluetooth

Video Transcript for Review of Redarc Battery Charger - Battery Management System - RED83TR

Hi, everyone. Steven here with etrailer.com. Let's take a look together today at our REDARC Manager Alpha50 battery management system with lithium profile and color display, and you can use it in Bluetooth option. So folks, this is gonna be a state-of-the-art battery management system. It can charge, maintain your auxiliary batteries. It's great for RV and marine applications, caravans, camper trailers with multiple battery banks and those kind of setups.

Now, what's neat about this is it's gonna operate in basically like six products into one. So it can do a auxiliary battery charger, 110 volt charger, solar regulator, battery isolator, and low-disconnect controller, and also remote battery monitor. So you can connect again with Bluetooth connection to your mobile phone via the Red Vision app, and you can get the same data and control available that you would see on the display monitor in the palm of your hand. So this is a display monitor that would be mounted somewhere and you get the frame here, the mounting plate rather. And then all the connections are in the back obviously.

And so again, that's an option. And then again, you could use that app to hook up everything else. So you have the power cables here, all the data cables, a couple extra connectors, a nice little microfiber cloth for wiping down the screen and things. Now, what this will do is it's going to be lighter and smaller compared to some of the other kits that are out there and things. And it incorporates AC, DC, and solar inputs to charge multiple auxiliary batteries simultaneously.

It's gonna monitor and calculate your power usage so that you always know how much power is remaining and where that power is coming from specifically. Now, that monitor screen is a user-friendly display monitor, giving you all the options at your fingertips that you need. Now, this does solar prioritize over other sources, giving you maximum efficiency of the unit. Now, you have a couple other parts here and everything that come with it. I do wanna spin the main unit around, it's not too heavy, and kind of show you where all your hookups and everything are.

And there's a lot of this red tape that tells you to tear it off, remove it during the initial install, or after it rather, for safety and just for, you know, their instructions. So make sure you're following all those instructions. And then this cover right here, I pre-removed it before we started, but that slide right back into place, pops in there, and then all your connections will be covered and safe. And of course, you have your main power connection here in the back for the main power cord. So again, folks, a nice unit. Current output is 50 amps. The output power is 800 watts. Now, this does include a lithium profile so that you can charge those lithium iron phosphate batteries as well as traditional lead acid, gel, calcium and absorb glass mat batteries or AGM batteries. And the sensors will allow charging of non-lithium auxiliary batteries in freezing conditions as well. So this is a very nice option for you. Again, it's gonna work with all vehicles, all alternators, including those variable voltage alternators as well. Folks, I know it's a lot of information, it's a lot of stuff to go through. If you have questions about solar or battery management or those kind of things, reach out to us. Comment below, we'd love to hear from you. And also, we'd love to see some photos of your setup and tell us how you're using it and where you're using it. I'm Steven, thanks for watching.