To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
You hit the brakes and feel it - gear sliding in your truck bed. A propane tank rolls, paint cans shift, and now you have a big mess. Tmat keeps everything in place, and when you need something, slide the mat out and grab it without climbing in.
A truck bed is flat and wide open, which means all your gear slides around unless you strap it down. And most of the time, that's easier said than done. You toss in a propane tank, a cooler, cans of paint, maybe a few tools, and by the time you hit the first corner, it's all shifted. The tank's rolled up by the cab, the cooler slid sideways, and your truck bed and tools are now the same color as the paint that just spilled. Now you're forced to climb in to straighten it all out, and that's how you tweak your back or bang a shin on the tailgate. It doesn't take much before the whole setup becomes a pain to deal with.
Tmat fixes that without changing how you load your truck. You still toss in your gear like always, but now it stays put. The Tmat system includes three types of blockers, each made for a different kind of gear. Stout Stationary Blockers are the taller ones, built to brace larger items like propane tanks or toolboxes. Quick-Fit Stationary Blockers are shorter and work well for tool bags, buckets, or other gear that tends to slide around. Adjustable Blockers give you the most flexibility, sliding open or closed to hold odd-shaped or uneven items when nothing else fits quite right. When your setup changes, just move the blockers to fit. Everything stays where you put it and nothing gets spilled or damaged.
And when you need to grab something, you don't have to climb into the bed to reach it. Just slide the mat out and your gear comes with it. No crawling in and no unloading half the truck to get to the front. The Tmat pulls out as far as you need, but it's best to stop short if you're carrying heavy gear. Because the mat is flexible, anything too heavy that slides past the tailgate will tip or fall. Keeping the weight on the bed or tailgate keeps everything stable and still easy to reach.
Speaking of keeping your gear safe, the good news is if you use a tonneau cover, the Tmat won't interfere at all. It sits low in the bed and the blockers stay out of the way, so you can close the cover like always. Other systems take up too much space and force you to leave the cover open or take it off. With Tmat, everything works like it should.
If it fits that cleanly under a tonneau cover, it's no surprise it works just as well in other spaces too. Tmat is built for more than just truck beds. You can drop it into a van, trailer, or SUV by changing how it's put together. It even works around gooseneck hitches. The panels snap together in different configurations, so you can build the shape you need and still use the blockers to keep gear from moving. You get the same setup and the same benefits, just shaped to match whatever you're driving.
Warning: Large or heavy items may need additional tie-downs or ratchet straps.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone, Steven here with etrailer.com. Today we're looking at our Tmat slide-out truck bed mat and organizer for full-size trucks with long beds. So, 8-foot to 8-foot-2-inch full-size trucks with long beds. This is going to keep your gear from shifting. The Tmat blocker system braces your cargo, so cans, boxes, gears, and tools stay put. This is just a little bit of the whole kit.
I'm going to throw an image up of what comes with this kit. You're going to get everything in that top left-hand image there. You're going to have 32 12-by-12 panels, eight 12-by-2-inch strips, two tight-fit tall blockers, two tight-fit small blockers, and then two adjustable blockers. And of course, the rubber mallet there. That bottom left photo just kind of shows where this can work.
Even if you have a gooseneck in the bed or something like that, you can go around it. And then that far right photo shows kind of everything laid out, what it could potentially look like in the bed of the truck. Now, zooming in here, again, you've got the mallet, you've got the two adjustable sliders here. And you simply squeeze those together, and then these will slide, there we go, forward and back. And there's notches here, you just got to squeeze them, squeeze them enough.
And then what that's going to do is give you a flat part there to push against. You got the two tall blockers. And the two short T blockers. And here's what one of those 12-inch by 12-inch panels looks like. It's just heavy-duty plastic.
You got four notches here sticking out, four on this side. And then you've got interlocking tabs on the opposite side to lock them together. And all you really have to do is just kind of put them together and then use your hand (panel pounding) and kind of push them together like that. And then you are ready to go. So, nice, firm, it's holding in place. And then if you need one of these T blockers, you can simply push that down in place where you need it. And again, just hand-tight or hand-pop, is that simple. And now you've got gear. Maybe you had a couple over here of these different ones. And now you've got a couple different options here as far as holding gear down into place. And again, they are really simple to remove, just kind of wiggle them a little bit. They come right out. Sometimes they take a little more than others. But that's what the hammer is for. (mallet pounds) So when want to pop them out, (mallet pounding) we just simply tap them back apart with the included hammer. (mallet pounding) There we go. And then same thing with these, they kind of just wiggle out. So, again, I apologize for the noise, but it's just a lot of plastic parts. And then again, you have these 12-inch long by 2-inch strips. These are kind of going to be your fillers along the outside, if you will. So no tools, no drilling, just snap them together, drop them in, you're ready to go. They're going to work great in vans, SUVs, and trailers, as well, again, as these full-size pickup trucks. Well, folks, that's going to wrap it up for our quick look together. I'm Steven. Thanks for watching.
Works as advertised.
I did receive the shipment Thanks. There are not any tiles with the handles. Without them, the edges are sharp.
I got to test out the sample that we received of this product, and it's been great! I use my truck for everything from the weekend get away with the family, to hauling my gear and dog on hunting trips, and keeping things from shifting around in the truck bed has been game changing. This system kept my gear organized and me worry free. Definitely recommend!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.