Blue Ox TrackPro Weight Distribution Shank for 2" Hitches - 7 Hole Adjustment - 1,500 lb TW

Video Transcript for Review of Blue Ox Weight Distribution Hitch - Adjustment Shank - BLU77HR

Hello, everybody, this is Jeff at etrailer.com. Today, I'm gonna take a look at this Blue Ox TrackPro Weight Distribution Shank with the seven adjustment holes for 2 inch hitches. Now, this shank portion right here is what'll slide into your 2 inch hitch receiver and it provides the attachment point up front here for your Blue Ox TrackPro Weight Distribution Head Assembly. If you notice down here, it does include the 5/8ths inch diameter pin and clip to secure the shank to your hitch. Now, this does offer drop positions or if you flip it over, rise positions available to fit your tow vehicle. We mentioned the seven adjustment holes right here for attaching your head assembly to.

The distance between those holes, center to center, is 1 and 1/4 inches. So basically, when you attach your head assembly, this will let you level your trailer. This is a powder coated steel, has a black finish on it to resist corrosion. This part is made in the USA. Maximum gross trailer weight capacity is 15,000 pounds.

Maximum tongue weight capacity is 1,500 pounds. Last thing, I wanna give you a few measurements. We're gonna measure the overall height, so from the bottom here to the top right here. So if we take our tape measure and if we go bottom to the top, you'll be able to see, is 11 and 5/8ths inches. Overall length, this end to this end is right at 16 and 1/8th inches.

And then the length that they call it is a 12 inch length. And what they're talking about lengthwise is center of hitch pin hole to center the adjustment holes. So you can see, if we go center to center there, here's your 12 inch length for that measurement. But that should do it for a look at this Blue Ox TrackPro Weight Distribution Shank with the seven adjustment holes for 2 inch hitches.