Replacement Wiring Harness for ARB Intensity V1 Lights with Deutsch DT-06 Connector

Video Transcript for Review of ARB Replacement Wiring Harness - ARB47KJ

Hi, everyone, Steve here with etrailer.com. Today we're looking at this replacement wiring harness for the ARB Intensity V1 lights with the Deutsch DT06 connectors. Now folks, this is a full harness. It has been rated for one pair of early-generation, 130-watt, round Intensity driving lights. So it uses what's called DT06 or Deutsch connectors. That's just the name of these connectors here.

And they are waterproof when they're connected. So they've got a rubber grommet and everything, and when they connect to the matching connector, they're gonna give you a nice watertight seal. You don't have to worry about anything getting in there and causing short circuits or anything like that. You're gonna get the push button switch. (button clicking) You're gonna get the relays, the fuses.

Everything you need is here with this kit. The grounding wire's got the terminal on it already, inline fuses has the wire on it. You've got lots of cable ties here to run this wire wherever you need to run up, up outta the way. It's got the wire loom protection over it. You've got the double-sided adhesive here, the 3M connector for putting this push button somewhere on the dash or wherever you want it.

You've got the two bolts for installation of the main fuses and everything here that are in these boxes included. So everything you need here, again, for wiring up one pair of the early-generation, 130-watt, round Intensity driving lights. Folks, that's gonna do it for a look together at this replacement wiring harness for the ARB Intensity V1 lights. I'm Steven, thanks for watching.