Curt Ball Mount for 2" ATV Hitches - 1-7/8" Ball and Clevis Bar - 1/4" Rise

See what our Experts say about this CURT ATV Hitch

• Does Draw Tite Hitch work with ATV Curt Ball Mount for 2014 Dodge Durango
  The Draw Tite hitch part # DT38MR is a confirmed fit for your 2014 Dodge Durango and would work great with just the ball mount portion of the # C45029 but since you'd already have a hitch you wouldn't need this full kit and could instead use just the part # C45005 instead.
  view full answer...
• Length of Curt C45005 3 In 1 ATV Ball Mount
  The overall length of the Curt # C45005 3 in 1 ball mount for 2 inch ATV hitches is 11-1/4 inches, and the center of the hitch pin hole to center of the 1-7/8 icnh trailer ball is exactly 6 inches, as shown in the provided photo. I've linked to a product demonstration video featuring the # C45005 ball mount.
  view full answer...
  
• Dimensions and Weight Capacity of the Curt Ball Mount for 2" ATV Hitches # C45005
  The capacity of the Curt Ball Mount for 2" ATV Hitches # C45005 is the same as the capacity of any ATV hitch it would be used in. It does not have a stated capacity beyond that but basically your ATV hitch would fail before it would. It is a hollow shank too. The length is 6 inches from the pin hole to the center of the hitch ball and 7-1/2 inches from the center of the pin hole to the center of the clevis hole.
  view full answer...
  
• Clevis/Ball Mount that Fits 1-1/4 inch Trailer Hitch
  The closest option we have would be the Brophy Clevis Mount for 1-1/4 inch hitches part # CM91 which can use a standard ball mount or can have a clevis pin part # CP91 installed. For trailer balls, use # 19256 for a 1-7/8 inch ball and # 19258 for a 2 inch ball.
  view full answer...
• Ball Mount Recommendation for a Polaris Ranger UTV with 2 inch Hitch
  For a UTV a lot of guys like the part # C45009 which has a 2 inch ball and a clevis bar or the part # C45005 which has a 1-7/8 inch ball and the clevis bar. Both of these have a 1/4 inch rise.
  view full answer...
• Recommended ATV Ball Mount for Towing Garden Trailer
  It sounds like you are needing something like the Curt Ball Mount for 2 Inch ATV Hitches # C45005. This specially designed ball mount will slide right into a standard 2 inch receiver and features a welded-on 1-7/8 inch hitch ball, a 5/8 inch diameter clevis hole, and a tow strap attachment for multiple towing options. I have attached a short video demonstration on this product so you can see exactly how it works.
  view full answer...
• Extension of Curt Clevis Trailer Ball Ball Mount # C45005 Used With Hidden Hitch # HE18 Extender
  I'm assuming you're speaking of the Curt 1-7/8 ball and Clevis Mount, part # C45005, is that correct? If you were to use the # C45005 in combination with the # HE18, you would indeed get 24 inches of extension, measured from the hitch pin hole in the receiver hitch o your EZ-GO cart tot he trailer ball on the # C45005. However, using the extension will lower the tongue weight capacity of the hitch by half. I've provided a photo showing the dimensions of the two parts when used together.
  view full answer...
  
• Distance from Pin Hole to End of Curt Ball Mount for 2" ATV Hitches # C45005
  From the center of the hitch pin hole to the opposite of the Curt Ball Mount for 2" ATV Hitches # C45005 is 8 inches.
  view full answer...
  
• What Size Hitch Pin Does The Curt Ball Mount for 2" ATV Hitches Use?
  Hello Curtis. The Curt Ball Mount for 2" ATV Hitches # C45005 uses a standard 5/8" pin to attach the hitch to the receiver.
  view full answer...

Do you have a question about this ATV Hitch?