Video Transcript for Review of Pullrite Replacement Coupler Head With Pin Box Adapter - PUL99ZR

Hi, everybody. Andy here with etrailer.com. Let's take a real quick look together at this PullRite Replacement Coupler Head with Pin Box Adapter. Now this coupler head is going to fit your PullRite OEX and ISRX fifth wheel hitch bases. And this features a unique two piece design that's going to allow for fast and easy coupling. This coupler is going to bolt around your trailer's kingpin to create a new connection point.

Let me go ahead and bring this up here just a little bit closer so you get a good view of it. And so this is gonna be very easy to install around your kingpin. It should take no time at all to get that set up. So again, that's going to give you that new connection point. And then the open funnel that we have right here is going to just drop right into that base.

And this is going to make it very easy to guide the ball in with that funnel. So you're gonna be able to easily see from your cab during hookup. And then this does include the remote latch handle. That's going to make it easy to reach the release latch from a lower tailgate so you can operate that very easily as well, just like that. So this combined is going to provide up to seven and a half inches of extra cab clearance.

And the height is also going to be adjustable. You'll have three height positions there, as you can see. So you're gonna be able to get your fifth wheel trailer level with your truck. So your whole towing setup will be nice and level. This is made here in the USA.

It has been SAE J2638 tested to a gross towing weight capacity of 25,000 pounds and a vertical load limit of 6,250 pounds. You're gonna get the hitch plates here. And then the the bolts to get the hitch plate into place, along with the set bolts. So everything that you see here is going to be included with this adapter. But I think that's gonna wrap up our quick look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.