Is 20 Threads Per Inch a Fine Thread Pitch for a 1/2 inch Wheel Bolt
Published 09/15/2014
Question:
I believe 20 threads per inch is considered fineinch pitch versus coarse. My old lug nuts are fine pitch and just wanted to make sure I am buying the right ones. Thanks
asked by: Dave
1
Helpful Expert Reply:
20 threads per inch would be a fine thread pitch on a 1/2 inch wheel bolt like the part # CE11051. A coarse thread would be 14 threads per inch.
expert reply by:
Jameson C
1
Product Page this Question was Asked From
CE Smith Trailer Wheel Lug Nut - Zinc-Plated Steel - 1/2" - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Golf Cart Tires and Wheels
- Trailer Tires and Wheels
- Wheel Lug Nut
- 1/2 Inch Wheel Bolt
- Hex Nut
- 13/16 Inch Outer Diameter
- 60-Degree Cone
- Zinc-Plated Steel
- CE Smith
more information >
Continue Researching
- Q&A: Typical Trailer Lug Nut Diameter and Thread Pitch
- Q&A: How To Determine the Correct Size Lug Nuts For a Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Most Popular Wheel Bearings
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What Size Lug Nuts are Used for a 5 on 4-1/2" Bolt Pattern
- Q&A: What Size and Type Battery are Best For a 5,000LB Winch?
- Q&A: Lug Nut Nuts for Dexter 10K Axel
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Q&A: What is the Lug Nut Size for My Utility Trailer with 3500-lbs Axle
- Q&A: Lug Nut Torque Recommendation for 3,500 Pound Hubs and 15 Inch Steel Wheel
- Article: Trailer Tire Sizing
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Trailer Wiring Diagrams