bing tracking image
Q & A Icon

Will Air Lift Air Bag Kit Fit a 2024 Ford Bronco Black Diamond with the Sasquatch Package  

Updated 05/15/2025 | Published 03/20/2025

Question:

I just wanted to confirm this is a “bolt on” kit for the 2024 Bronco Black Diamond with SAS package.

0

Expert Reply:

Hey Justin, thanks for reaching out!

I'm guessing by "SAS Package" you're referring to the Sasquatch Package. In that case yes, the Air Lift LoadLifter 5000 Air Helper Springs # AL38FF are compatible with your 2024 Ford Bronco Black Diamond, and the hardware will bolt on without modifications.

I typically recommend installing an air compressor kit like the Air Lift WirelessONE # AL25980, but you'll want to only do that if you can place the compressor away from wet elements. Your Bronco configuration looks like it's built for off-roading so if that's in your future plans you'll either want to stick with manually adjusting/monitoring the air bags, or you'll need to make sure the compressor is in a safe place.

Let me know if you have any other questions!

expert reply by:
0
Jon G
Aaron profile picture

Aaron

5/9/2025

I have a follow up question, if you don’t mind. I’m also looking at these airbags for my Bronco. Mine is a ‘23 4-door also Sasquatch, but with the Fox suspension. I assume these airbags will fit (please confirm) and my question is about the air compressor. I have a twin motor ARB compressor (the CKMTA-12) already installed on my Bronco and was wondering if this air compressor will work with these airbags. If so, any additional parts or fittings I would need to make it work? Thanks!

Jon G. profile picture
Etrailer Expert

Jon G.

5/13/2025

@Aaron The Air Lift LoadLifter 5000 Air Helper Springs # AL38FF will fit as long as the Fox suspension is part of the OEM package. If it isn't you'll just want to check where those shocks sit in relation to the air bag kit. In order to use your ARB compressor to control the air bags you need the ARB LINX Pressure Control Kit # ARB66PR. Let me know if you have any other questions!
Aaron profile picture

Aaron

5/13/2025

@JonG thanks for the response. The Fox suspension is stock so I’ll take it the air bags will fit! I do have follow on questions. I still want to be able to use the ARB compressor as the onboard air resource I originally bought it for as I do air down when I’m off-road. So will I need a split adapter with the LINX to be able to continue using my air hoses and their attachments? If so, any other additional parts I’ll need? What about monitoring the pressure to set the airbags? Sorry if the question seems redundant, the picture doesn’t show a lot and ARB’s website didn’t help much either. I just want to make sure I have everything I need before taking on this project. Thanks again!
Jon G. profile picture
Etrailer Expert

Jon G.

5/15/2025

@Aaron I completely understand! I was able to get back into contact with my guy at ARB and finally confirm EVERYTHING you need to get this done. In addition to your ARB Compressor, you need the following parts to monitor and control the Air Lift air bags: - LINX Pressure Control Kit # ARB66PR - Compressor Manifold Kit # ARB38FR - LINX Vehicle Accessory Interface Kit # ARB25DR Thank you so much for your patience as I looked into this!
See All (5) Replies to Aaron ∨

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>