Can Continuous Steel Piano Hinge # H300 be Cut to Length Needed

Question

Question:

I am make cabinets for my enclosed trailed and going to use the continuous hinge on the doors and need to knew if the continuous hinge can be CUT to the size I need them? THANK YOU

asked by: George B

1

Helpful Expert Reply:

Yes, you can cut the hinge, # H300, to the size you need with the proper equipment. An angle grinder with a cutting wheel would be a good choice to cut the hinge. We have other hinge options if you are interested. I have linked them for you.

expert reply by: Michael H

1

Answer 1

Here is a list of the tools needed to install the etrailer Enclosed Trailer Transition Plate #e32JR: - Tape Measure - Drill - Hex Drive Socket Adapter - 10mm Socket - 13mm Socket I have also added a link below to the instructions of the #e32JR for…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hey Jack, If you're talking about a transition plate then you'll want the etrailer Enclosed Trailer Transition Plate #e32JR. This can be installed on either end of the ramp to help make the transition onto easier or at the hinge of the ramp…

view full answer...

Answer 4

We do not sell a complete kit but we do sell a backing plate that is compatible with the Square D-Ring Tie-Down Anchor item #ABS69FR. It is the Backing Plate for Brophy Recessed D-Ring Tie-Down Anchor item #BP05.

view full answer...

Answer 5

Marlboro does not list weight capacities for either the #MA75VR or the #MA45VR that you referenced. They state it will be up to the installer to determine the appropriate weight capacity. We also do not have this in a 3 foot length.

view full answer...

Answer 6

There is one hitch lock for a 2-1/2 inch hitch that stands above the rest to protect the Gen-Y Phantom X Adjustable 2-Ball Mount - 2-1/2" Hitch #GY95XR. The lock I highly recommend to keep your ball mount safe is the InfiniteRule Hitch Lock for…

view full answer...

Answer 7

Yes, the 3" Wide Continuous Hinge - 6' Long - 1/4" Pin Diameter - Aluminum #MA74ZR can be cut down to fit your needs. I just recommend first removing the pin and separating each part before cutting them. You'll be better off cutting…

view full answer...

Answer 8

With the Fulton weld-on gooseneck hitch coupler GN24, part #BDGN240200, you can use Blaylock coupler lock #BLTL-50 along with padlock #ML40D.

view full answer...

Answer 9

I have an alternative solution for you, but I spoke with my contact at Bulldog and he informed me that there isn't really a great way to lock the Bulldog Gooseneck Coupler Head #BDGN240200. What you will need to do is jack the trailer this…

view full answer...

Answer 10

Hey Leif! I checked with Wells Cargo and the closest thing we have to what you described and they sell is the 3" Wide Continuous Hinge - 6' Long - Aluminum item #MA74ZR. This measures 6' long x 3" wide and each side of the foldable…

view full answer...

Can Continuous Steel Piano Hinge # H300 be Cut to Length Needed

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching