Replacement Hinge for Thule Hyper XL 612 Cargo Box

Question

Question:

Will this fit the Thule Hyper XL 612?

asked by: Ivo

0

Expert Reply:

I spoke with my contact at Thule and she confirmed that replacement hinge # TH14936 will fit the Thule Hyper XL TH612.

I have included a link to a Video of Replacement Hinge # TH14936 for Thule Cargo Boxes.

expert reply by: Chris O

0

Answer 1

The mounting hardware for the Thule Hyper XL TH612 is the part #TH7521484001 which is designed to fit bar dimensions of up to 3-1/2" wide x 1-11/16" tall. If you have bars that are taller than 1-11/16 inches there won't be a way to make…

view full answer...

Answer 2

Great news! I spoke with my contact at Thule to confirm, and the correct replacement lid lifter for your Thule Spirit 689USBXT cargo box is the Thule Replacement Lid Lifter Hinge #TH14936. I have attached an installation video of this lid lifter on a…

view full answer...

Answer 3

The replacement hinge you referenced, part #TH14936 is indeed the correct replacement hinge for your Thule Force XL cargo box. I have confirmed this with Thule.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hello Paul, thanks for reaching out. The inside dimension of the Curt Heavy-Duty Dual Ball Attachment for Weight Distribution Shanks #C29NR is 2". It will work with any standard weight distribution shank. I edited a picture to illustrate.

view full answer...

Answer 8

Hey JD, The Weigh Safe Hitch w/ Built-In Scale for 2.5" Hitch #WS88RR uses hitch pic lock #WS54CR, which has a shear strength capacity of 45,000lbs according to Weigh Safe.

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Hello Anthony, Since your 2016 Ford F-250 Super Duty has the standard size bed 6.7' you are going to want a sliding hitch to ensure that you have the clearance on those sharp turns, no one wants to ruin their vacation by taking out the cab of…

view full answer...

Answer 11

Hey Carl! How much does the Weigh Safe weigh? With all of the parts put together the #WS88RR weighs 35-1/2 lbs. If you need anything else don't hesitate to reach out in the comments below.

view full answer...

Answer 12

Hello Todd. Yes, there is a 1-7/8" ball available for the Weigh Safe Hitch w/ Built-In Scale #WS88RR. For that, you can use the following: Replacement 1-7/8" Hitch Ball for Weigh Safe Ball Mounts - Stainless Steel - 7,500 lbs #WS66KR Leave…

view full answer...

Replacement Hinge for Thule Hyper XL 612 Cargo Box

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching