Are Replacement Gear Packs Available for An Older RBW Landing Gear?

Updated 05/18/2023 | Published 05/17/2023

Question:

I am looking for gears to fit an RBW Landing gear Looking for 5th Wheel Rv Landing Jack Bevel Miter Gears Gear Rbw P-137 what might you be able to do. Thank you for your time

asked by: John C

Expert Reply:

Unfortunately, RBW industries was absorbed by AL-KO quite a while ago and have since stopped producing replacement parts for their landing gears.

At this point, your best bet is to replace your entire landing gear with something more current like the Lippert Electric Landing Gear Set - Weld On - 37" Lift # LC333964.

This particular landing gear has a combined weight capacity of 6,000-lbs, a total lift of 37", and is made in the USA.

In order to pick out the correct replacement landing gear, you're going to need to measure the distance between the inside and outside weld-stops. This landing gear has an inner wed-stop measurement of 15-1/2" and an outside measurement of 17-1/2", so if that's what yours comes out to, then you'd be set to use this one.

If not, let me know and I'd be happy to find something for you.

expert reply by: Bryce D