How To Pair Voyager WiSight 2.0 Wireless RV Backup Camera and Monitor

Question:

How do we pair the new monitor with our existing camera??

asked by: Daniel

Expert Reply:

To pair the Voyager WiSight 2.0 Wireless RV Backup Camera 7" Monitor # ASA27FR with your Voyager WiSight 2.0 Camera # ASA64YR or # ASA74YR you will need to follow the following steps.

PAIRING PROCESS
This system contains an Auto-Pairing function. If your monitor is not receiving a signal from the camera; the two may not be paired correctly.
1. Make sure the monitor is connected to 12 Volt DC power supply, but 12 Volt DC power is removed from the camera (clearance lights turned off).
2. Press the SEL/PAIR button on the front of the monitor expected mode & select the appropriate AV source.
3. Press and hold the "SEL/PAIR" button on the front of the monitor for 5 seconds and release. (Monitor will display "PAIRING")
4. Apply 12 Volt DC power to the camera (turn on the clearance lights). If pairing multiple cameras to the system, make sure that only the only the corresponding camera (Camera 1 –Camera 4 corresponding to Monitor's CH1- CH4) has power when pairing.
If done correctly, the monitor will display "PAIRING SUCCESSFUL". If pairing is not successful, the monitor will display "PAIRING FAIL". If you receive this message, repeat steps