Will TruRyde Dust Cap Covers part # DC200L-DCRP Stay Installed
Published 06/23/2022
Question:
I have a 1997 Four Winns dual axle boat trailer. I went through the wheel bearings last fall and replaced the dust caps with new ones I purchased at Tractor supply. My axles have grease zerks in the ends so I need the dust covers with the rubber caps. I noticed 2 of the caps were crooked and made sure they were all seated squarely with a plastic hammer before my first short trip and still lost one going over the first railroad track. I believe the parts I purchased at Tractor Supply were low quality.junk Have you had any issues with you dust caps coming loose? I have been working on vehicles for 45 years and I am confident I can install a dust cap correctly.
asked by: Mark C
Expert Reply:
Our TruRyde dust cap covers like the part # DC200L-DCRP which fits hub bores of right at 1.99 inch have not had issues falling off like what you described. I would feel very confident recommending this cover as one that would stay installed.
Product Page this Question was Asked From
2" Lubed Dust Cap & Rubber Plug - 1.99" x 1.40" x 1.18" - Qty 1
- Trailer Bearings Races Seals Caps
- Caps
- EZ Lube Grease Cap
- 1.98 Inch O.D.
- TruRyde
more information >
Continue Researching
- Q&A: Lug Nut Upgrade for Lionshead LR103 Capped 1/2" Lug Nut
- Q&A: Do You Have Idler Hubs for My 2021 Coyote Tandem Axle Trailer Under Robalo Cayman 226?
- Q&A: Replacement 14" Tire for 2014 Starcraft Comet
- Q&A: Where Are Kenda Tires Manufactured?
- Q&A: Does TowSmart Hitch for 2021 Mercedes GLB Require Frame Drilling
- Q&A: Flange Nut to Fit with MORryde Shoulder Bolts for Trailer Suspension
- Q&A: Replacement Bearing Kit for a Triton 12420-P 1" Bearing Kit