What are the Heights of Reese Weight Distribution Shanks RP54970, RP3215, and RP3344
Updated 09/24/2013 | Published 09/22/2013
Products Featured in This Question
Question:
What is the vertical length of these 3 shanks from top to bottom please. Thank you
asked by: Malcolm T
Helpful Expert Reply:
On Reese shank # RP54970, the height of the vertical part is approximately 7 inches. For Reese shank # RP3215 the vertical part is 12 inches. And on Reese shank # RP3344 the vertical part is approximately 16 inches.
If you need a specific rise or drop, let me know how much rise or drop you need and if you are using a round bar or trunnion bar system. I have including a link to our FAQ article that will explain how to measure for rise or drop.
Product Page this Question was Asked From
Reese Weight Dist Shank - 12-1/4" Long - 2" Drop to 6-1/2" Rise - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1400 lbs TW
- Fits 2 Inch Hitch
- Round - 2 Inch Drop
- Trunnion - 1 Inch Drop
- Round - 5 Inch Rise
- Trunnion - 6 Inch Rise
- Reese
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Weight Distribution System Recommendation for a Rockwood Mini Lite 23.7 Trailer
- Q&A: Comparing Reese Strait-Line and Curt TruTrack Weight Distribution Systems for 5,800 Pound Trailer
- Q&A: Will Friction Sway Control Stop Swaying Trailer that Already has Weight Distribution
- Q&A: Can Reese Pro Round Bar Weight Distribution Shank Be Used In Rise Position
- Q&A: Weight Distribution System Needed for a Trailer with a Tongue Weight of 2,300 lbs.
- Q&A: Recommended Weight Distribution System for 1,175 lb Dry Tongue Weight Trailer
- Q&A: Weight Distribution w/Sway Control Recommendation for 28ft Airstream Towed by Lifted F-250