DeeZee Bed Mat Recommendation for a 1969 Chevy Fleetside Short Bed C-10

Updated 03/23/2020 | Published 08/23/2013

Question:

Do you offer, or can you tell me where to find, a bed mat for the bed and tailgate for a 69foot C-10 fleetside....short bed. Looked into spray-in liner but too expensive and even though its a street rod I want to keep parts of it original.

asked by: Jack A

Expert Reply:

In my research I have found that the inside dimensions of a 1969 Chevy C-10 Fleetside are 76-1/4 inches long by 65 inches wide. The width was taken at the inside rear of the truck bed at the stake pockets so the actual bed floor will be less.

My technical contact at DeeZee told me that the Heavyweight Truck Mat # DZ86973 will most likely need to be trimmed because the older beds were a bit smaller than the ones now. This mat measures 78-1/2 inches long by 62 inches wide.

My contact also could not verify that the # DZ86973 that you referenced will have the appropriate wheel well cut outs as your truck. Their guide does not go back to 1969.

The rectangle mats where you would do all the necessary trimming are not wide enough for your truck.

The universal tail gate mat is DeeZee # DZ86700.

expert reply by: Lori W

Oscar

3/23/2020

What do you have for bed liner for 1969 Chevrolet C10 Long Bed?

Chris R.

3/23/2020

The best option we have available would be a universal bed mat like the 6 foot long # DZ85009 or the 8 foot # DZ85005, which can be trimmed to fit. There isn't a custom liner available for the 69 Chevy C10.

Helpful Links

Enclosed-Trailer-Parts/DeeZee/DZ85005.html

Enclosed-Trailer-Parts/DeeZee/DZ85009.html