Troubleshooting Lost Power on a 1993 Fleetwood Limited RV Outlet with Generator
Updated 03/09/2022 | Published 03/05/2022 >
Question:
when plugged in I have power to my control center but no power to the outlet that my converter plugs into. when I plug the converter into a 120v alternative source then everything works fine. when i run the generator all works. Does this mean that my controller is the problem or the converter? Magnetek 40amp series 900 model 940-2 converter Magnetek controler model 80 30amp
asked by: Mel
Helpful Expert Reply:
From the sounds of the issue, there does not appear to be a problem with the controller or the converter. In order to find the cause of the issue, the best way to proceed is to plug into a shore power source and trace the wires all the way to the outlet that has no power. This sometimes is the case when an aftermarket generator is added to an older model RV like your 1993 Fleetwood Limited. You can test the wiring trail throughout to test to see if there are any shorts with a circuit tester like the LCD Digital Tester # PTW2992.

Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Troubleshooting No Power At The Factory Trailer Plug
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Does Adding ETBCL Only Require Power & 4-Way For Curt Echo Brake Controller
- Q&A: Recommended Flat Towing Wiring Harness for a 2013 Honda CR-V
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Trailer Wiring Diagrams
- Q&A: How to Find COLD Side of Brake Light Switch for Hardwiring Brake Controller
- Q&A: Buyers Products Hitch Plate Dimensions
- Q&A: Installing a Brake Controller on a 2016 Honda Odyssey
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Brake Controller Installation: Starting from Scratch
- Article: Tow Bar Wiring Overview