Will Smittybilt Winch Fit on Bulldog Winch Mounting Plate

Question

Question:

will Bulldog Winch Universal Mounting Plate for Truck and Trailer Winches Item # BDW20291 work with Smittybilt X2O - Waterproof Steel Cable Winch - 10,000 lb. Load Capacity?

asked by: Jon B

0

Expert Reply:

Yes the Smittybilt winch you mentioned would fit on the Bulldog Universal Mounting Plate for Trailer Winches part # BDW20291 that you referenced.

expert reply by: Jameson C

0

Answer 1

You can either use the Universal Mounting Plate #BDW20291 (which requires the hardware kit #BDW20297) or the Hitch Mounting Plate #BDW20011 for your Bulldog Winch Standard Series Off-Road Winch #BDW10043. Both have compatible mounting hole dimensions…

view full answer...

Answer 2

Yes, your Warn 17081 will fit the Bulldog Winch Universal Mounting Plate for Truck and Trailer Winches #BDW20291. It has the standard 10" x 4-1/2" mounting pattern Warn uses and the same 10" fairlead spacing as your 17081.

view full answer...

Answer 3

I recommend using the Bulldog Winch Universal Mounting Plate for Truck and Trailer Winches #BDW20291 for your Badland Winch, which has a 4-Bolt mounting pattern (center on center) of 10" x 4-1/2". For hardware you will want to use the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 6

First we have the Timbren Active Off-Road Bumpstops #T83MR for your 2022 Toyota Tundra. These bump stops allow for the most suspension travel while still absorbing road shock to improve your suspension comfort off road. The Timbren Suspension…

view full answer...

Answer 7

Hey Frank, on the etrailer box part #e64VV all of the walls are welded. The thickness of the steel is 13 gauge. What will you put in the box?

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hello Tim, Are you asking if you can back up with just the head installed on the Weigh Safe True Tow Weight Distribution Hitch #WS79VR, when you put the trailer coupler onto the ball? If so, then yes because at that point it is really just a ball…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Will Smittybilt Winch Fit on Bulldog Winch Mounting Plate

Product Page this Question was Asked From

Continue Researching