Can Tubeless 4.80 Tires be Used on a Tube Tire Trailer Rim
Updated 05/13/2020 | Published 05/11/2020
Question:
Can a tubeless 4:80 tire be put on older4:80 rims that had a tube?
asked by: Scott
1
Helpful Expert Reply:
It is possible to use a 4.80 tubeless tire like part # AM10004 on a wheel designed for tube tires without a tube. The wheel has to be a one-piece wheel that has a hole for a valve stem and a flap to help seal the tire to the wheel. If your wheel does not meet these requirements you will need to replace the wheel.
expert reply by:
Heather A
1
Product Page this Question was Asked From
Kenda K371 Bias Trailer Tire - 4.80/4.00-8 - Load Range C
- Trailer Tires and Wheels
- Tire Only
- Bias Ply Tire
- Load Range C
- 4.80/4.00-8
- 8 Inch
- Kenda
more information >
Continue Researching
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Q&A: What Tire Pressure Is Recommended On 4.80/4.00-8 Load Range C Trailer Tire For Highway Speeds
- Q&A: What is Speed Rating of Trailer Tires in Size 4.80-8
- Q&A: Highway Legal 4.80/4.00-8 Tire that Can Go Up to 65 MPH
- Q&A: How to Decipher Trailer Tire Size Numebers
- Q&A: Are Tubes Needed For The Kenda K371 Bias Trailer Tire - 4.80/4.00-8 - Load Range C # AM10004
- Q&A: Should Inner Tube Be Used with Kenda K371 Bias Trailer Tire # AM10002
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Tire Sizing
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Determine Tire/Wheel Diameter