Troubleshooting No Sound or Display on Jensen AWM910 Stereo

Question:

I have a Jensen AWM910 and the volume quit work in the numbers come up but theres no sound

asked by: Scott

Expert Reply:

If the volume and display suddenly stopped working on your Jensen model AWM910 Stereo then most likely it experienced a small electrical surge that caused the system to lock up. In this case a simple resetting of the unit should resolve the issue and allow it to continue normal operation.

To do this on your Jensen model take a look at the front panel of the stereo. There should be a small reset pin hole to the left of the AUD button. Use a ball point pen or pencil to hold this button down for 1-3 seconds. This will reset the stereo and hopefully clear the problem.

expert reply by: Chris R

Juan P.

6/7/2020

I have a Jensen JWR 200b military radio and i want to reset it. Where is the reset button located?

Chris R.

6/10/2020

From what I could find there doesn't appear to be a reset pin hole on the face of the Jensen JWR200 model stereo. Your only option might be to physically disconnect it from power to reset the unit.

Marc

8/11/2020

I have a Jensen AWM968 stereo and the sound quit all of a sudden for all the inputs. I tried the reset button, but no luck. Any idea how to fix it? Thanks