Recommended Boat Cover For 16 Foot Lund Rebel SS Boat and 40 HP Outboard Motor
Published 10/18/2011 >
Products Featured in This Question
Question:
Have a 16 ft Lund Rebel SS with a 40 hp outboard - do you have a cover that fits the boat and motor - can it be used outdoors in winter or should another top be set up above it
asked by: Craig
Expert Reply:
You will need to determine the beam width of your 16 foot Lund Rebel SS Boat, for the proper fit of a cover.
A boat cover I would recommend that is good for outdoor storage is the Classic Accessories Boat Cover by StormPro, part # 052963889284. This cover fits 14 foot to 16 foot long boats that have a beam width of up to 90 inches. The StormPro covers will repel water, but are not waterproof. You will want to measure your beam width to determine if this cover will work. If your beam width is over 90 inches, you may need the # 052963889383 cover. These covers can be used in winter weather and you will not need another cover on top of the StormPro Covers.
A step up from the StormPro cover is the DryGuard cover which is a water-proof cover. Checkout the Classic Accessories DryGuard Waterproof Boat Cover, part # CA20084, which will fit 14 to 16 foot long boats with a beam width of up to 90 inches. Again, you will want to measure the beam width of your boat.
The cover you selected, Classic Accessories Hurricane Canvas Boat Cover, part # 052963840384, would be better for an inside storage facility.
I have linked instructions for the Classic Accessories Hurricane Outboard Motor Cover, part # CA20011.

Product Page this Question was Asked From
Classic Accessories Boat Cover by StormPro - 14' - 16' (beam width 90")
- Boat Covers
- V-Hull Boat Cover
- Vented
- 90 Inch Beam Width
- 14 Foot Boats
- 15 Foot Boats
- 16 Foot Boats
- Gray
- Classic Accessories
more information >
Continue Researching
- Shop: Classic Accessories Boat Cover by StormPro - 14' - 16' (beam width 90")
- Shop: Taylor Made Outboard Motor Cover - 24" Tall x 15" Long x 12" Wide - Gray
- Shop: Taylor Made Eclipse Inshore Fishing Boat Cover - 17' to 19' Long Boats - 90" Beam
- Shop: Taylor Made BoatGuard Center Console Boat Cover - 17' to 19' Long Boats - 96" Beam
- Shop: Taylor Made BoatGuard Drift Boat Cover - 16' to 17' Long Boats - 84" Beam
- Q&A: Boat Cover Recommendation for a Crestliner Tri Hull 17 Feet Long
- Video: Feature Breakdown: Boat Trailer Standard Roller Bunk
- Shop: CE Smith Bunk-Style Guide-Ons for Boat Trailers - 60" Long - 1 Pair
- Article: Trailer Wiring Diagrams
- Search Results: trailer tires and wheels
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Trailer Wiring
- Shop: Suspension Enhancement
- Search Results: spare tire mount
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Shop: Brake Controller
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Search Results: trailer leaf springs
- Video: Fulton Single Axle Trailer Fender with Top and Side Steps Feature Review
- Shop: Tonneau Cover
- Search Results: trailer jack
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Most Popular Wheel Bearings
- Search Results: trailer lights
- Shop: Gooseneck Hitch
- Search Results: trailer wiring