Landing Gear on 2010 Fuzion FZ322 Toy Hauler Travels a Few Inches But then Stops

Updated 06/26/2018 | Published 06/23/2018

Products Featured in This Question

Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs

(190)

$824.31

Replacement Switch for Stromberg Carlson Electric Landing Gear

(61)

$69.97

Question:

The landing gear extends fine about 8 inches with a load then stops like it has no power checked voltage im getting 13.2 at motor replaced motor and gear box ran the landing gear out check for scarring thinking maybe one was bent but nothing, what else could it be?

asked by: DAVID B

Expert Reply:

It is possible that you have a bad switch. It is also possible that the battery needs to be charged or replaced. The motor is going to pull what it is going to pull but will have to keep working harder to pull the current required to operate. If there is a problem with the battery then it can't function. You could have the battery tested at an auto parts store to see if it is in good working order.

I would do that first so that you aren't buying switches or wiring you won't need. If the battery also checks out fine then it is likely a switch since by then you have already checked or replaced anything else it could be. The replacement switch for # LG-4 is # LG-145236.

Does it go up and down fine if you use the manual override crank handle (if equipped)?

expert reply by: Michael H