Rocker Switch Wiring for a Superwinch Terra Series ATV Winch

Question

Question:

Need wiring diagram so I can install a rocker switch

asked by: Philip

1

Helpful Expert Reply:

The replacement rocker switch for the Superwinch Terra Series ATV Winch part # SW1145220 is the Replacement Controller for Superwinch Terra Series ATV Winch part # SW87-42609. I have attached the wiring diagram of this rocker switch for you as well.

expert reply by: Conner L

1

click to enlarge

Answer 1

I attached a diagram that shows how the Superwinch part #SW1130220 gets wired up. In it you can see which terminal you would need to run the black and red wires. Is the battery you are using fully charged? What you described is typically the sound of…

view full answer...

Answer 2

I'd be more than happy to help you out! Attached is a wiring diagram for the Superwinch LT4000 ATV Winch #SW1140220. We don't have the instructions available as a download, but when I reached out to my contact at Superwinch they were able to…

view full answer...

Answer 3

From the sounds of your issue, you have either the Terra 35 #SW1135230 or the #SW1135220. The first thing that I recommend is to try both the rocker switch and the handlebar switch to help rule out a switch issue. Also, it is important to rule out…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 7

Since the Front Runner crossbars have a channel/t-slot on top of them the Rhino Rack adaper part #RR43105 that you referenced would be the correct adapter to allow a Rhino Rack Pioneer Platform to them.

view full answer...

Answer 8

In order to use the Rhino-Rack Pioneer Platform Rack on a 2010 Chevrolet Tahoe Hybrid you'd need to install a track system which I have listed for you below. Rhino-Rack RTC-Style Roof Rack Tracks part #RTC14 Rhino-Rack Track Mount RLTP Legs for…

view full answer...

Answer 9

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

Wheel bolt patterns are defined by two numbers: the first being the number of lug nuts and the second being the diameter of the circle the lug nuts are arranged in. So a 5 on 4-1/2 bolt pattern is 5 lugs arranged in a circle that is 4-1/2 inches in…

view full answer...

Rocker Switch Wiring for a Superwinch Terra Series ATV Winch

Continue Researching