Recommended Replacement Brackets And Hardware For Karavan SLT-5000

Updated 03/06/2018 | Published 03/05/2018

Products Featured in This Question

CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 13" - Qty 4

(583)

$67.36

CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 4

(345)

$59.14

CE Smith Carpeted Bunk Boards for Boat Trailers - 6' Long - 1 Pair

(696)

$80.94

Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers

(394)

$259.78

Question:

I have a Karavan SLT-5000 boat trailer and a 22 ft. boat with a deep V-Hull. When I put the boat on the trailer the front set of bunks do not come close to reaching the hull. I think I need to change out the brackets holding the bunks on for longer ones so they sit up high enough to support the boat. Do you have any recommendations for what kind of brackets I would need to make that work? Thanks!

asked by: Colli L

Helpful Expert Reply:

For your boat trailer, I recommend the CE Smith Bolster and Swivel Bracket Assemblies # CE10002G-4. These brackets are available in different heights. These brackets are held to your trailer with u-bolts like the CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter # CE15283GA-4.

These brackets hold on your Bunk boards like the CE Smith Carpeted Bunk Boards for Boat Trailers - 6' Long - 1 Pair # CE27840 that are available in different lengths or the roller bunks like the Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers # DL21741. The roller bunks provide support and less resistance when loading and unloading your boat.

expert reply by: Timothy G