Longest Set of Folding Ramps for Loading Generator in Truck Bed
Question:
can you recommend a folding ramp to load a 150 ib. honda 3500 generater into the back of our 2017 dodge 1500 pickup. the tailgate is approx, 36 inches off the ground. we are old peeps and some ramps would be too steep for us, your help would be appreciated
asked by: Sherrie
Expert Reply:
The longest folding ramps we have for you is the Arched Loading Ramp Set part # 288-07432 for 1 or part # 288-07432-2 for 2 which are 90" long. The 90" length will ensure the angle that will be required to load the generator in your truck bed is not too steep. They are reasonably priced and very lightweight weighing in at only 23.5 lbs per ramp. The great thing about these ramps is that they have cam buckle safety straps that prevent the ramp from sliding out during loading and unloading.


Bob S.
1/11/2025
Conner, what is that lifting device in your picture, where do I get it, and how much. It looks much better than ramps for loading household goods, generator,snow blower, etc. Wonder if it breaks down, so can transport with load and set up to unload at second location.

Continue Researching
- Q&A: Recommended Ramps For Loading 1690lb UTV In The Bed Of A Truck
- Search Results: 288~07432~2
- Shop: Gen-Y Loading Ramp - Center Fold - Aluminum - 96" Long x 15" Wide - 3,000 lbs
- Shop: Loading Ramp Set - Aluminum - 65" Long x 20-1/2" Wide - 3,000 lbs - Qty 2
- Video: Arched Loading Ramp Set Feature Review
- Shop: CargoSmart Folding Loading Ramp - Aluminum - 77" x 50" - 1,500 lbs
- Shop: Go Power Sun Cycle Advanced Lithium RV Battery - LiFePo4 - Bluetooth - 12V - 300 Amp Hour
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Q&A: How Big are the Holes on the Stallion Folding Ramp 288-07432-2?
- Shop: Flint Hill Goods Arched Ramp Set - Aluminum - 5-1/2' x 20-1/2" - 3,000 lbs
- Shop: CE Smith Carpeted Bunk Boards for Boat Trailers - 7' Long - 1 Pair
- Search Results: atv ramps
- Q&A: Will The CE Smith Single Axle Trailer Fender Fit On a Tandem Axle Trailer?
- Search Results: ramps
- Video: Installing the SumoSprings Solo Custom Helper Springs on your 2018 Chevrolet Silverado 1500
- Search Results: ramos
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Q&A: Adding A Second Battery To Your Go Power Overlander Solar Charging System Battery Bank
- Search Results: ramp set
- Search Results: atv utv ramps
- Q&A: Can the Spring Bars on an Equal-i-Zer WDS Be Swapped Out
- Q&A: Ramp Recommendation for Loading Golf Cart into Truck Bed
- Search Results: air bags
- Q&A: Vent Screen and Screen Base to Replace Part Numbers VD0433 and VD0434 on 2011 Grey Wolf 26RL
- Video: Review of Ventline Replacement Screen Frame With Screen - BVC0573-32
- Video: Ventline RV Vents and Fans BVC0573-41 Review
- Video: All You Need to Know About the Camco Insulator for RV Roof Vents
- Video: Valterra Thermal RV Roof Vent Insulator Review
- Video: Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents: The Breakdown
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
Gary
7/19/2020
Any idea how hard it would be to wheel a 270 lb generator up a 10 foot ramp into a pickup? The ramp angle would be about 20 degrees.