Replacement Wheel Stud for 2006 Boat Trailer with Disc Brakes
Question:
Im looking for an obscure replacement wheel stud for a 2006 boat trailer with disc brakes. I have good pictures if that helps. The stud is 2inch long, 1/2-20 threads with the following measurements: A - 1/2 B - 2 C - .84 D - .95 E - .55 The knurls are closer to the threads rather than the head of the stud. Any help would be greatly appreciated.
asked by: Steve F
Expert Reply:
We do not have the obscure replacement stud you are seeking. The Kodiak Wheel Bolt - 1/2" Diameter x 2" Long # K12WB2 will meet your measurements with the exception of spline and base length, so it will fit but won't be quite as strong as your previous wheel stud. This is the closest fit we carry.

Product Page this Question was Asked From
Kodiak Wheel Bolt - 1/2" Diameter x 2" Long
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 2 Inch Long
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Looking For Wheel Studs For Dexter 4,400 lb Axle
- Q&A: Can 1/2 Inch Wheel Stud With .54 Inch Knurl Fit Hub With .55 Inch Knurl Stud
- Q&A: Replacement 1/2" Thread Wheel Studs For A Trailer
- Q&A: Replacement Wheel Studs For A 3,500lb Trailer Hub Assembly
- Q&A: Recommended 235/75R15 Replacement Tire/Wheel for a 2018 Airstream Basecamp
- Q&A: Replacement for UFP HD1377 Trailer Hub/Drum
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Can You Flat Tow a MINI Cooper?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Bleed Your Trailer Surge Brakes
- Article: What To Look For When Buying Ratchet Straps
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub