Replacement Hub Compatible with Tandem Axle 1974 Prowler 24 Foot Trailer
Question:
I have a twin axle 24 ft 1974 prowler that has hub centric 15 inch wheels. I want to convert to 15 inch 5 lug with a 41/2 bolt pattern. What do I need to make that happen?
asked by: Ron G
Expert Reply:
To get you the correct parts, I will need you to pull off one of your hubs and check the inner and outer bearings for numbers. Normally there is a number printed on the face of the bearing and seal. If there is not a number that can be made out, then measuring the spindle with a digital caliper like # PTW80157 will give us the inner diameter of the bearings and seals we need to get your hub replacement. I've attached an article as well as a photo to assist with this.

Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Replacement Hub w/ a 5 on 4-1/2 Lug Pattern and L44643 Inner and Outer Bearings
- Q&A: How to Pick Out Replacement Hubs for a Boat Trailer
- Q&A: Never Adjust Brake Assemblies for Dexter Trailer Hub 8-247-50UC3 Which Fits 3,500 lb Axles
- Q&A: Dexter EZ Lube Bearing Kit Recommendation for 3500 lb EZ Lube Spindle that Includes Nut Retainers
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Grease Seal for GS-1250DL
- Q&A: How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Most Popular Wheel Bearings
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub