How to Install the Curt T-Connector # C55106 on a 2008 Honda CR-V

Updated 04/28/2020 | Published 07/24/2017

Question:

HELP WITH THE WIREING KIT

asked by: DOUGLAS

Expert Reply:

To install the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C55106 you will need to locate the connector in the rear hatch of your 2008 Honda CR-V. This requires the removal of some of the panels in your rear cargo area. It is located behind the panel on the driver side. I have attached an installation video that you can use as a reference.

expert reply by: Jon G

Randall

4/26/2020

i dissasemble all the panels, but couldnt find the factory adapter for tow lights it is supposed to be on the drivers side, in the back of the car, taped with blue or green tape, on my 2007 CRV.is it supposed to be on all CRVs? or just some models? oculd it be loose somewhere else? or in the right side not the drivers side.

Chris R.

4/28/2020

The factory port that the Curt Harness # C55106 plugs into should be present on all models of the 2007 CR-V. Sometimes these plugs can be really well-hidden, so it might just be a matter of digging around for a while - it could be located up closer towards the front of the vehicle but should definitely be on the driver's side. If you continue to have trouble please let me know.

Helpful Links

tv-install-trailer-wiring-2007-honda-crv-c55106.aspx