bing tracking image
Summer Deals You’ve Been Waiting For
SHOP DEALS
Customer Service My Orders
Q & A Icon

Picking Out Trailer Leaf Springs for Trailer with 30 inches between Hangers  

Question:

Ok lets try this , have a tandam trailer my hanger are 30in apart so what would the correct leaf springs an equalizer, the hanger are welded on so I dont want to remove them

0

Expert Reply:

To pick out the correct suspension components for a trailer you want to do it by most importantly picking out the springs that closely match the capacity of the axle capacity needed. That is priority one.

For example if you were using the springs part # 1020, # e66SR, # e34SR, # e28SR, or # e57SR with the hanger kit part # APT5 that comes with equalizers that are 7-3/4 inches long you would want the hanger spacing to be 29-1/2 inches which is pretty close to what you have. All of these springs are 25-1/4 inches long.

expert reply by:
0
Jameson C

Product Page this Question was Asked From


Featured Help Information

Miscellaneous Media

4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review
4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review - Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>