Possible Way to Wire Up 7-Way to a John Deere 4430

Published 07/15/2016

Products Featured in This Question

ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit

(492)

$159.65

Adapter 4-Pole to 7-Pole and 4-Pole

(646)

$59.13

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3284)

$124.38

Question:

i am trying to convert the wiring on a john deere 4430 to a 7 pole so it will hook up to my baler..currently i have a 4 pin on tractor with only 2 wires going into it.. what do i need to do?

asked by: MELANIE K

Helpful Expert Reply:

Does your tractor have standard taillight functions like stop light and turn signals? What signals do the two wires carry? I am assuming one is ground but not sure what the other would be.

What you would need to do is use the part # 119250KIT to tap into any available taillight circuits so that you could give yourself a fully functional 4-way. From there you would use the part # 37185 to convert it to a 7-way. Or, if you have trailer brakes that you need to operate you would need part # ETBC7 with a brake controller.

expert reply by: Jameson C