Replacement Red and Clear Trailer Light Lenses for Peterson Lights
Updated 12/01/2015 | Published 11/30/2015
Products Featured in This Question
Question:
Need replacement of lense covers red = brake/turn/signal and clear = backup light. This is for RV Only numbers for red: ROL #1500 SAE ILST 82 DOT. This is similar to the sealed led unit in size 4.25 in, but if I use the sealed unit I have to cut holes in RV fender and rewire. #435800 by Peterson. I can send pictures if I had you email address. Thank you.
asked by: Chuck D
Expert Reply:
We have a wide range of replacement trailer light lenses for Peterson and many other brands of popular trailer lighting. The linked page will let you select the shape of the lenses you need. If you know the brand of light you have, such as Peterson, you can also click on that filter to narrow the results shown.
For examples, for a clear lens for a Peterson 413S stainless trailer tail light we have part # 414-15C. Part # 420-15 is a replacement red lens for a Peterson model 428S trailer tail light.
Light part numbers are usually found on the light's base, not on its lens. The numbers you found are DOT codes. Please feel free to send me a photo of your lights along with any numbers from their bases and I will be glad to help you find suitable replacement lenses.
A link to all new trailer lights is also included in case you prefer to replace the lights.
Product Page this Question was Asked From
Optronics Trailer Tail Light - Stop, Turn, Tail - Incandescent - Round - Red Lens
- Trailer Lights
- Tail Lights
- Brake/Tail/Turn
- Round
- Recessed Mount
- Non-Submersible Lights
- Incandescent Light
- 5-3/8 Inch Diameter
- Red
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Wheel Similar To Lionshead Bobcat
- Q&A: Replacement Hub With LM48548 Inner Bearing And L44649 Outer Bearing
- Q&A: Troubleshooting Dexter Electric Over Hydraulic Brake Actuator Pump that Runs But Brakes Do Not Work
- Q&A: Wiring Instructions for Optronics 4-1/2 Inch Round Trailer Stop Turn and Tail Light # ST40RB
- Q&A: What Hole Size is Needed for Flush Mount of Peterson # 435800 Sealed Tail Light
- Q&A: 4 Inch Round Trailer Tail Light Cutout Size
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Article: Performance Chips and Modules
- Article: 5 Reasons to Convert Your RV Lights to LEDs Today
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Converting Your RV Water Heater to Tankless
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams