What Does GVWR Mean for a Truck

Question

Question:

I have a 1997 Dodge Ram 2500 short bed with Quad Cab. I am looking at a class V hitch. What is the max weight I can pull with my truck? I know the hitch will have a higher towing capacity but what can my truck safely pull? I do not understand the ratings.. GVWR1 8800 lbs Maximum Trailer Weight Rating2 8400 lbs Maximum GCWR3 14000 lbs Can I pull a boat that weighs 8500 lbs and the trailer weighs 2500-3500 lbs. Thanks

asked by: Scott W

0

Expert Reply:

The gross vehicle weight rating (GVWR), or gross vehicle mass (GVM) is the maximum operating weight/mass of a vehicle as specified by the manufacturer including the vehicle's chassis, body, engine, engine fluids, fuel, accessories, driver, passengers and cargo but excluding that of any trailers.

Maximum trailer weight rating is the heaviest trailer you can tow. So for your truck the heaviest trailer you can tow would be 8,400 lbs regardless of what hitch you use. So you would not be able to tow your trailer that weighs over 8,500 lbs.

expert reply by: Jameson C

0

Answer 1

That's a great question, your measurement will come from behind the cab. If you have a typical pickup of this generation of F-series, especially SRW, you will most likely have the 37" frame; most all pickups sold to the general consumer and…

view full answer...

Answer 2

I spoke with my Curt representative, who tells me that the front face of the receiver would sit 10-3/4 inches rearward of the rear-most mounting hole. If you find the rear most mounting hole in the underside of the frame member and measure 10-3/4…

view full answer...

Answer 3

Because the mounting flange of the Curt #C15511 Class V hitch has 3 tabs on each side, rather than a continuous mounting flange like many other hitches, it'll fit around the rivet shown in your photo. However, be aware that the Curt #C15511 is a…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

I would be happy to and thanks for the pictures! The B&W Heavy-Duty Trailer Hitch item #BWHDRH25122 measures 5.4" from the top of the frame brackets to the top of the receiver and 19-1/2" to the back of the receiver from the last bolt.…

view full answer...

What Does GVWR Mean for a Truck

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching