view cartView Cart
Only 13 Hours 10 Minutes Remaining


Nissan Titan Brake Controller

change vehicle

Select Nissan Titan Year

Brake Controller

Custom fit Brake Controller for your:



Available Years for Brake Controller



Brake Controller for Nissan Titan

Brake controllers with a custom fit wiring harness for your Nissan Titan make trailer towing safer and installation easier. We offer high quality controllers in both time-delay and proportional models, from manufacturers such as Tekonsha, Hopkins, Valley, and Draw-Tite. Brake controller wiring adapters are available for most <%=fMake%> Nissan Titans, allowing for simple plug-and-play installation.




What our customers are saying:

I've been very happy with your service and impressed by the amount of information your site offers. You saved me a bunch of time figuring out how to hook up a trailer brake controller on my F-150. Thanks!

Jeramiah

Fort Wayne, IN





Nissan Titan Brake Controller Videos

Trailer Brake Controller Installation - 2008 Nissan Titan

All right today on this 2008 Nissan Titan we're going to install part number 90195. This is a Tekonsha T3 trailer brake controller. We'll also be using an adapter cord, part number 3050-P. This will connect to the factory tow package port underneath the dash. We'll start with this part first. First we need to locate the port underneath the dash.





Nissan Titan Brake Controller Questions and Answers


  • Parts Needed to Install a Brake Controller on a 2013 Nissan Titan
  • To install a brake controller like the Prodigy P2 Brake Controller part # 90885 that you referenced in your 2013 Nissan Titan all you would need is the Brake Controller Adapter part # 3050-P if you have a factory 7-way. If you do not have the factory 7-way then you would additionally just need the 7-Way Install for Nissans part # N40975. I attached install videos for both products. Having a breakaway system on your trailer should not affect how a brake controller would install.
    view full answer...

  • Installing a Brake Controller on a 2004 Nissan Titan with Factory Tow Package
  • The folks at the Aluminum Trailer Group sent you to the right place. There are a few different routes you can take to install a brake controller on your 2004 Nissan Titan. Since it came with the factory tow package, you could simply purchase the Tekonsha Prodigy P3 Brake Controller, # 90195, and splice the included universal harness to your OEM harness that was included with the truck. The wires on the brake controller harness are listed below. Black - 12v Battery Feed Blue - Brake...
    view full answer...

  • Do I Need a Brake Controller on my 2005 Nissan Titan LE when Towing my Grey Wolf 26RR Toy Hauler
  • A brake controller is required to operate the brakes on your trailer. Without the controller, your trailer will have no working brakes. I recommend the Tekonsha Prodigy P2 Brake Controller, # 90885, with Custom Plug-In Wiring Adapter, # 3050-P, for your 2005 Nissan Titan LE. This brake controller activates your trailer brakes in proportion to your vehicle's braking action.
    view full answer...

  • How to Wire Electric Trailer Brake Assembly
  • Electric trailer brake assemblies have two leads that are non-polarized, so it does not matter at all which wire serves as your ground connection to the trailer frame and which receives the brake circuit signal from your brake controller. Either wiring configuration will work fine so long as you make solid and secure connections. For reference I have linked a brake installation video.
    view full answer...

  • Brake Controller Installation on 2010 Nissan Titan
  • All 2010 Nissan Titans came equipped with the connector under the dash, which is located between the steering column and the emergency brake pedal. I have provided a photo showing where the plug is located. The Tekonsha Prodigy P2 you mentioned is a very good brake controller that would be a great choice. You would also need the Nissan Brake Controller Wiring Adapter, part # 3050-P. The controller would mount to the underside of the dash within easy reach of the driver, usually to the...
    view full answer...

  • Troubleshooting Brake Controller Installed on 2010 Nissan Titan
  • If you are using the Nissan factory harness, the harness will not wire to the brake controller color for color. Check the way you have the controller wired to the factory harness, it should be wired like this: Red Nissan Harness Wire to Black Brake Controller Wire Red and Green Striped Nissan Harness Wire to Red Brake Controller Wire Black Nissan Harness Wire to While Brake Controller Wire Brown and White Striped Nissan Harness Wire to Blue Brake Controller Wire If you have determined...
    view full answer...

  • Connecting Reese Pilot Brake Controller to OEM Nissan Brake Controller Harness on 2012 Nissan Titan
  • I can certainly help you with that. The Nissan OEM brake control pigtail would connect to your Pilot brake controller as follows: Harness Red Wire to Black Wire on Controller Harness Red/Green Wire to Red Wire on Controller Harness Black Wire to White Wire on Controller Harness Brown/White Wire to Blue Wire on Controller The Red/Blue wire on the harness is for an illumination circuit that is NOT used. This wire should be bundled up out of the way and the end capped off so it...
    view full answer...

  • Manual Override Button of Pilot Brake Controller Stuck in On Position
  • If the manual override button will not return once pressed in, there is an interior spring that is broken and the controller must be replaced. This could certainly be contributing to the fact that the controller is not reading your trailer. If you are still having problems once you replace the controller, you can troubleshoot it by following the procedures shown in the video I will link you to. For a replacement controller, I always recommend a proportional controller which will apply...
    view full answer...

  • Troubleshooting Reese Pilot Brake Controller Installation On a 2006 Nissan Titan
  • It sounds to me like the wiring harness for installation of the brake controller may be pinned wrong. First, make sure the you spliced the like color wires from the Pilot brake controller, # 80550, to the wiring harness, # 20266, for your 2006 Nissan Titan. Next, make sure you have the correct wiring harness for your truck. Since the connector is plugging into the factory connector on your truck you might just need to re-pin the connector. I attached a photo I edited for you to see exactly...
    view full answer...

  • How to Find the Brake Switch Wire on Factory Brake Control Harness on a 2011 Nissan Titan
  • What you can do is use a circuit tester like # 3808 if needed to test the wires on the factory harness. The brake controller red wire is for input from the brake signal on the truck. When you test the wires, you will need the one that shows a signal on the tester only when you step on the brake pedal. If the wire shows a signal at any other time, like when the headlamps are on or turn signals are on it is not the correct wire. For the remaining wires on the brake controller, the white...
    view full answer...

  • Recommendation of Brake Controller for 2009 Nissan Titan to Activate Electric Brakes on Car Hauler
  • To operate the electric brakes on your trailer you will need to install a brake controller in your 2009 Nissan Titan XE. Our most popular brake controller that I would recommend is the Tekonsha Prodigy P2 Brake Controller, part # 90885. This is a proportional brake controller that will apply power to your trailers brakes in proportion to the vehicles braking. I am including a link to the installation instructions on the Prodigy P2 brake controller. Since you have a factory tow package...
    view full answer...

  • Parts Needed to Install an Electric Trailer Brake Controller on a 2007 Nissan Titan or Frontier
  • If you have a 2007 Nissan Titan or Frontier and the truck has a factory installed 7-Way trailer connector all you will need is the brake controller and vehicle specific wiring harness. I recommend going with a proportional brake controller that engages the trailer brakes in proportion to how much the truck is breaking. This will reduce wear and tear on the truck and trailer and make for safer braking situations. For a proportional controller with wiring harness, I recommend the Tekonsha...
    view full answer...

  • Troubleshooting Reliance Brake Controller Not Activating Trailer Brakes on 2009 Nissan Titan
  • I will be happy to help troubleshoot the problem you are having with the Reliance brake controller and your 2009 Nissan Titan. I can think of 3 possible causes that may lead to the trouble you are having. First, the wire on the vehicle that provides the braking signal could be having problems. On the brake controller wiring harness, it is the pin that has the red wire. A couple of things to check on the harness and the connection point on the vehicle. First, using a circuit tester like...
    view full answer...

  • How does the Brake Controller Connect to a 7 Flat Pin Hitch Connector On a 2004 Nissan Titan
  • The connector you will need to install the Draw-Tite Activator Brake Controller, item # 5100, to your 2004 Nissan Titan is the Tekonsha Wire Replacement for Nissan, part # 3050-P. This adapter has a 6-pin connector that mates with the factory brake controller 6-pin connector located under the dash of your vehicle. The factory connector is located left of the steering wheel column, taped to another harness near the emergency brake pedal. This connector has all of the circuits needed...
    view full answer...

  • Will the Tekonsha Prodigy P2 Brake Controller Fit a 2006 Nissan Titan
  • The Tekonsha P2 brake controller # 90885 would be a good match for your 2006 Nissan Titan, but the brake controller itself does not have vehicle specific fits. Instead, you would be able to use a brake control wiring adapter # 3050-P to allow the brake controller to be plugged right into your existing factory brake control connector. See the photo we produced for you showing the location of the connector. I have included some links to information on brake controllers, as well as the...
    view full answer...

  • Wiring and Display of the Draw tight Activator 2 on a Nissan Titan
  • To attach the Draw-Tite Activator II, item # 5500, electronic brake controller to your vehicles factory connector you will need a Universal Brake Control Wiring Adapter, Nissan, item # 20266. This adapter has four wires that attach color for color to the wires on the brake controller. If you have an adapter that plugs into your vehicle that has five wires then you will have to use a circuit tester, item # 3808 if you need one, and verify the function of each wire once it is plugged in. Attach...
    view full answer...

  • Compatibility of Draw-Tite Activator Brake Controller with 2008 Nissan Titan
  • If the 7 way was installed properly with all connections properly functioning, you should need nothing other than the Draw-Tite Brake Controller, part # 5100 and wiring harness # 3050-P. I would also recommend looking at part # 90185-3050P. It is a proportional controller, which means it will provide trailer braking that more accurately matches the tow vehicle. This results in safer, more comfortable towing. I have included links to instructions for both of these models. Additionally,...
    view full answer...

  • Installing Pilot Time Delayed Brake Controller on 2007 Nissan Titan
  • I do not have a wiring diagram to provide, but I can run through the process for you. To connect the Pilot 2-6 Brake Electronic Brake Controller to your 2007 Nissan Titan you will need the 20266 Nissan brake control wiring adapter (see link below). The wires on the adapter are spliced to the like color wires on the brake controller. With this harness you will be able to connect to the manufacturer supplied connector under the dash and if you have a factory installed 7-way trailer...
    view full answer...




Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email





Only 13 Hours 10 Minutes Remaining

etrailer.com reviewsetrailer.com reviews

All images, layout and content copyright etrailer.com