Customers compare EM55HR to these similar products
Products Featured in this Video
Hi there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Empire Faucets RV Tub Faucet and Shower Head Set. This is going to allow you to upgrade your shower set in your RV or camper. This does have a single handle design with a lever style handle so that you can adjust the temperature control. Make sure it's going to be just right for you.… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Yes, the Blaylock EZ Jack and Wheel Chock part #EZ-JACK can be used on a triple axle trailer like you have but you would need to turn the curve up, opposite the wheel, and drive up on the jack and you will be able to change the tires. Otherwise the…
view full answer...When changing just a couple tires at a time on your trailer, you will want to keep the trailer raised up off the ground to keep weight off the remaining tires. You can use jack stands like #PTW41021 to stabilize the jacked up trailer or the…
view full answer...I spoke with my contact at EZ-Jack and he says that to use the EZ-Jack on a triple axle trailer you will need to turn the curve up, opposite the wheel, and drive up on the jack and you will be able to change the tires. Other wise a floor jack and…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
view full answer...Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…
view full answer...To determine if your motorhome has the Tiffin air brake setup or Freightliner BrakeSync you'll need to look at the rear and see if there's an quick disconnect fitting for your air line. The standard Tiffin air coupler fitting would look like…
view full answer...I do have an option for you but most factory motorhome trailer hitches have a maximum capacity of 5,000 lbs. If you have a larger vehicle that you need to tow, this will have to be replaced. I don't have a bolt-on option for you but still an…
view full answer...The only difference between 7-Way Utility and 7-Way RV is the color of the wires. The pin outs are the exact same so either would work just fine with the other. If you check out the picture I attached you'll see that the functions are all the…
view full answer...