Yakima Locking BlockHead Single Bike Truck Bed Mounted Rack - Bolt-on - 9-mm Skewer

See what our Experts say about this Yakima Truck Bed Bike Racks

• Does Yakima Locking BlockHead Single Bike Truck Bed Mounted Rack Work with Disc Brakes
  Yes, the Yakima Locking BlockHead Single Bike Truck Bed Mounted Rack # Y01118 that you referenced can be used with bikes that have disc brakes like you have. I attached a review video for this rack for you to check out as well.
  view full answer...
• Can I Use Yakima Truck Bed Bike Rack to Carry Bike with Carbon Frame
  As long as your bike has a 9mm skewer then you're not going to have any issues using the Yakima Locking BlockHead Single Bike Truck Bed Mounted Rack # Y01118 since there is no frame contact with the bike. Your frame won't get scratched up this way and you'll still be able to safely carry it in the back of your truck.
  view full answer...
• What is the Distace of the Mounting Holes for Yakima Locking BlockHead Truck Bed Bike Rack
  The bolt holes of the Yakima Locking BlockHead Single Bike Truck Bed Mounted Rack # Y01118 measure 3-3/16 inches from center to center and it does not come with the hardware. Yakima recommends using 1/4 inch bolts.
  view full answer...
  
• Does Yakima Locking BlockHead Single Bike Truck Bed Mounted Rack Come With Hardware
  The Yakima Locking BlockHead Single Bike Truck Bed Mounted Rack # Y01118 does not include mounting hardware. For general mounting, Yakima recommends 1/4" bolts. There is nothing specifically designed to mount it to the bed rail system in your 2024 Tacoma so it will be up to you to decide the best way to install it on the rails.
  view full answer...
• Can 2 of the Yakima BlockHead Truck Bed Bike Racks be Ordered Keyed Alike
  The Yakima BlockHead # Y01118 all come keyed unique. But if you wanted 2 keyed alike you would go ahead an order 2 and then get a set of Yakima lock cores, # Y07202, which comes with the change key to replace the locks in the BlockHeads. Because of the added expense it is probably easier to just have the 2 different keys.
  view full answer...
• Truck Bed Mounted Bike Rack for a 2013 Ford F-150 W/ Roll-N-Lock Tonneau Cover
  I do have an option that will work for you but the Topline 2 Bike Carrier Truck Bed Mounted Expandable Bike Rack part # UG2500 will not work with the Roll-N-Lock tonneau cover you have on your 2013 Ford F-150 as the mounting clamps will interfere with the tonneau cover's rails and cannot be installed under the bed rail as this would likely decrease the bike rack's support. Instead, I recommend a bolt-on option like the Yakima Locking BlockHead Single Bike Truck Bed Mounted Rack part #...
  view full answer...
  
• How To Secure A Fat Tire Bike to Roof Rack on Tonneau Cover
  I do have an option for you but most locking fork mounted bike racks are not fat tire bike compatible nor would the Yakima Locking BlockHead Single Bike Truck Bed Mounted Rack part # Y01118 which I believe is what you're referring to be able to secure itself to the crossbar. Instead, I recommend taking a look at the Rhino-Rack Hybrid Roof Bike Rack for Fat Bikes part # RRRBC050-FB which will clamp around the crossbars you have above your tonneau cover and secure your fat tire bike without...
  view full answer...
• Can Truck-Bed-Mount Bike Rack Be Used Inside Vehicle Interior
  The Swagman Pick-Up Truck-Bed-Mounted 2 Bike Carrier # S64702 probably could be adapted to work in your 1995 Toyota Land Cruiser but I can offer you a better and lower-cost alternative. On the page I linked you can view fork-mount type bike racks that can install on the floor of the Toyota's cargo area, such as the Hollywood Racks # HRT970. Some of these even include locks, such as the Yakima Locking BlockHead Single Bike Truck Bed Mounted Rack # Y01118. You will need to measure the height...
  view full answer...
• Recommended Bike Rack and Ladder Rack or Roof Rack for Fishing Kayaks on 2002 Chevy 2500 6.5 Bed
  The # Y01118 can mount to your Weather Guard toolbox. I recommend using the sealant # LT37467 to make sure your toolbox remains water tight at the mounting holes. For your roof rack I recommend the Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 65" Long - Qty 2 # RRVA165B-2, the 2500 Series Legs # RRRLKVA, and the Fit Kit # DK227. These bars will be longer than usual which you will need for two fishing kayaks. Then for your carrier, I recommend the Rhino-Rack Nautic 581 Rear...
  view full answer...
  

Do you have a question about this Truck Bed Bike Rack?