Magnetic Towing Light Kit, 20 ft. Long Cord

Custer Tow Bar Wiring - C-ATL20A

A convenient solution for all your towing and trailer needs. Easy hook up and removal with the non-scratch magnetic base. 20 foot cord included.

• Includes Vehicle End 4 Pole Trailer Connector (36" Lead)
• 20' Cord with 4-pole trailer end
• Wire between the two lights measures 60" long

Customers compare C-ATL20A to these similar products

E-Z Mount Tow Light Kit, 20 ft. Long Cord$32.95

Roadmaster Deluxe Magnetic Tow Lights - 4-Pole Round Connectors$87.95

RoadMaster Standard Magnetic Tow Lights$54.95

Roadmaster Tail Light Wiring Kit with Bulbs$49.95

Tail Light Isolating Diode System with Wiring Harness$31.60

Customers Who Purchased This Tow Bar Wiring Also Bought...

Bonded 4 Wire - per foot $0.57

60" Car and Trailer End Loop 4-Pole $7.99

Tow Ready Adjustable Tow Bar, 5,000 lbs $154.95

RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs $44.95

RoadMaster Falcon 2 Tow Bar - 6,000 lbs $590.00

Replacement parts available for this product

Ask the Experts about this Custer Tow Bar Wiring
Do you have a question about this Tow Bar Wiring?

• Do Magnetic Towing Lights Require a 7-way RV Plug?
  
• No, you will only need the 4-way plug for the magnetic towing lights. The extra 4-pole is for the back of the RV as long as the RV doesn't have a converter. If the RV has a 7-way plug, we have an adapter, item # PK12716, if you do not want to install the vehicle end 4-pole that comes with the kit.
  view full answer...


• Do You Have to Wire The Magnetic Towing Light Kit
  
• Yes, if your vehicle has a properly functioning 4-way connector, you can just plug this magnetic towing light kit, part # C-ATL20A, in and go. Be aware that you will need to secure the wiring out of the way so that it does not get torn off and that the lights are mounted well so they do not fall or get knocked off. The extra vehicle end is for vehicles that do not have a 4-way connector already installed.
  view full answer...


• Base Plates Tow Bar and Accessories to Tow a 2006 Dodge Dakota Pickup behind an RV
  
• In order to safely tow your 2006 Dodge Dakota Pickup behind your motor home, you will need a hitch on your motor home, base plates on the front of your vehicle, a tow bar and a few accessories. This Curt Front Mount Trailer Hitch part # 31228 is intended for the front of a vehicle for use with snow plows, winches and tow hooks, so that would not work for your application. However, we carry the products you will need to get the job done. You will need base plates for your vehicle. The Roadmast
  view full answer...


• Wire Span on Magnetic RoadMaster Tow Lights RM-2120
  
• I spoke with the manufacturer regarding the span of the wires between the two lights on part # RM-2120. According to the manufacturer, the wire span between lights is 6 feet, or 72 inches.
  view full answer...


• What Parts Needed for Flat Towing a 2005 Saturn Ion
  
• The Roadmaster Falcon 2 Tow Bar, part # RM-520, and Roadmaster MX Base Plate kit, part # 3136-3 will work just fine with your 2005 Saturn Ion. If you will be towing your Saturn behind an RV or Motorhome, you may not need to have a brake system for the Ion. The Ion is small enough and light enough that an RV or Motorhome has sufficient stopping power for itself and the Ion, however, brakes are a good idea and are required by some state law and by some RV Manufacturer warranties. I will link you t
  view full answer...


• Do Magnetic Tow Lights Serve the 3 Basic Tail Light Functions
  
• Yes, the Optronics Magnetic Towing Light kit supports brake light, turn signal and tail light functions just like the lights on standard, small trailers. I have included a link to a page that has all our external tow light kits.
  view full answer...


• What Wiring Parts are Installed Where on a 2008 Toyota Sienna to Use a Magnetic Towing Light Kit
  
• Since a Toyota Sienna has separate turn and brake signals, you will need a 4-Way harness with a converter. Part # 118304 is the proper 4-Way harness for a 2008 Toyota Sienna. It will plug into the the back of the tail lights, no splicing at all. You will also connect the loose white wire with the eye terminal to a good ground point on the metal body or frame of the vehicle. I have added a link to this part, the instructions for it and a video of the installation. Once you have this part inst
  view full answer...


• Replacement Lens for Magnetic Towing Light # G4R-R Recommendation for Light Kit # C-ATL20A
  
• For your Magnetic Towing Light Kit part # C-ATL20A, you would want a Replacement Lens for Magnetic Towing Light, part # G4R-R.
  view full answer...


• Protecting Vehicle Paint from Scratches When Using Magnetic Towing Light Kit # C-ATL20A
  
• One solution would be to wrap the wires that contact the vehicle in electrical tape, # BT66. Electrical tape is soft and will not scratch or scuff the vehicle paint. It will also help to protect the wires for the elements. The downside is that a lot of people do not like the look of the electrical tape. Another option could be to use a wire loom like # 459075 (which is 100 feet worth). The benefit is that it looks better than the tape. The downside is that it is plastic and some edges may be
  view full answer...


• Recommendation For Wiring Kit When Flat Towing a 2003 Honda Element
  
• For a light wiring kit when flat towing your 2003 Honda Element, I would recommend two different choices. If you do not plan on towing the vehicle often, you can use a light kit like the Magnetic Towing Light Kit, part # C-ATL20A. If you do plan on towing it often, I recommend installing diodes using Roadmaster Universal Hy-Power Diode Wiring Kit, part # RM-154. With this diode kit the vehicle brake lights will function as both brake and turn lights. It will also have the diodes that prevent fee
  view full answer...


• Needed Items for Flat Towing 2012 Honda Fit
  
• For starters, you will need a tow bar and base plates. The tow bar mounts into the receiver on your Winnebago, and would use the base plates that permanently attach to the Honda Fit as an attachment point. I would recommend the Roadmaster Falcon 2 Tow Bar, part # RM-520. The Falcon 2 is our best seller, and is easy to operate. The vehicle-specific base plate kit is part # 521190-1. I will link you to our video showing this kit being installed on a 2010 Honda Fit. Next, you will need a lightin
  view full answer...


• Rewiring the 4-Way Trailer Connectors on the Magnetic Towing Light Kit # C-ATL20A
  
• If the wires pulled out from one of the 4-Way connectors and you cannot access the inside of the 4-Way housing to re-attach the wires, what you can do is add a new 4-Way. You can use the Quick Fix(TM) 4 Pole Flat Car and Trailer Ends, # 48195. With this kit you get one trailer end and one vehicle end. All you have to do is place the wires in the appropriate location and close the lid on it. The vehicle side has one exposed pin and that is for the white ground wire. Next to it will be the brow
  view full answer...


• Parts Needed to Replace All Wiring a Single Axle Cargo Trailer
  
• To completely rewire your cargo trailer, I would recommend picking up a trailer light kit like the Standard Light Kit, # TL5RK, or # TLL9RK for LED lights. These kits include all necessary wiring and hardware needed to install the lights on your trailer. The LED light kit does not include clearance lights. To add clearance lights, I would recommend using # MCL31AB. The best option would be the LED lights because they only use a fraction of the power that the incandescent lights use. If you de
  view full answer...