DeeZee Toolbox - DZ95D
20-1/2" Long x 8-1/2" wide x 18-7/8" tall. Wheel-well-style toolbox; steel construction; 5 drawers for storage; single, drop down door locks for security.
Features:
- Hardy, 20-gauge steel construction in wheel well style
- Locking, drop down door provides security for your belongings
- Lock is on front of toolbox
- 2 Keys included
- Simple installation
- Toolbox mounts behind either wheel well and sits on truck-bed floor inside the side rails (mounting hardware included)
- Fits under most tonneau covers
- Black powder coat finish
Specs:
- Overall dimensions: 20-1/2" long x 8-1/2" wide x 18-7/8" tall
- Capacity: 1.9 cu ft
- 3-Year warranty
The DeeZee Way
DeeZee's commitment to "add more life to your truck" is reflected in the design of this Specialty Series wheel well toolbox, which provides convenient storage behind the wheel well in your truck bed. The super-strong, steel toolbox is equipped with five drawers for organized storage and a single, drop down door that closes and locks to deter theft of your belongings.
DZ95D Dee Zee Specialty Series Wheel Well Tool Box with Drawers - Steel - Black - 1.9 Cu Ft - 20-1/2" x 8-1/2" x 18-7/8"
Ask the Experts about this DeeZee Toolbox
Do you have a question about this Toolbox?
- Will the DeeZee Wheel Well Toolbox, # DZ95D Fit a 2012 Dodge Ram Crew Cab Short Bed
- In order to determine if the DeeZee Wheel Well Toolbox, # DZ95D, will fit your 2012 Dodge Ram, you can compare the measurements of the box with the area on the truck you want the box to go.
The box measures 20-1/2 inches long, 8-1/2 inches wide, and 18-7/8 inches tall.
Measure the floor of the truck bed starting just behind the wheel well to the tailgate when its closed. If it is more than 20-1/2 inches, it will fit. Then you can measure from the bed floor up to the top of the side rail.
view full answer...
- Fit of DeeZee Wheel Well Toolbox # DZ95D on 2012 Dodge Ram Quad Cab
- According to DeeZee, the Wheel Well Toolbox you mentioned, part # DZ95D will fit your 2012 Ram, regardless of cab configuration or bed length.
I would suggest you take a look at the photo I edited for you that shows the dimensions of the box. You could then compare the measurements shown to the available space in your bed to confirm fit. Make sure to measure the distance from the rear of the wheel well to the back of the closed tailgate to ensure it is greater than 20-1/2 inches.
view full answer... 
- Will DeeZee Wheel Well Toolbox # DZ95D Fit 2012 Ford F-350 Super Crew Long Bed Carrying 4x8 Plywood
- After doing some research, I have found that 2 DeeZee Wheel Well Toolboxes # DZ95D will fit in the bed of your 2012 Ford F-350 Super Crew Long Bed with enough room for 4 foot by 8 foot sheets of plywood with room to spare. The bed width of your truck is 79.9 inches and each toolbox has a width of 8.5 inches for a combined width of 17 inches, so with both toolboxes and the sheets of plywood, you should have approximately 14.9 inches of space remaining in your truck bed.
The drawers of this too
view full answer...
- Will DeeZee Specialty Series Wheel Well Toolbox, # DZ95D, Fit a 2013 Toyota Tundra Platinum
- To determine if the DeeZee Specialty Series Wheel Well Toolbox, # DZ95D, will fit your 2013 Toyota Tundra, you will need to go by the measurements of the box. I have included a picture showing the dimensions for you. It is 8-1/2 inches wide, 20-1/2 inches front to back, and 18-7/8 inches tall. Compare this to the space available in your truck to determine fit.
view full answer... 
