Truck Bed Toolboxes are available to fit all makes of trucks including Ford, Chevy, Dodge, GMC, Nissan, Toyota and Mitsubishi.
You can use our fitguide to ensure that your new toolbox will fit perfectly in your truck. We offer Saddle Mount, Side Rail, Bed Floor, Wheel Well (pork chop), Underbody and Transfer Tanks that will suit your tool storage needs and your budget.
What our customers are saying:
This is one of the best web sites i have bought anything from. My salesperson was extremely helpful. i will buy from this site again.
Tool Box Manufacturers
UWS Crossover Toolbox Review - 2006 Chevrolet Colorado
Today on our 2006 Chevrolet Colorado well be test fitting the UWS truck bed tool box narrow crossover style slim lien series at 3.4 cubic feet, in black, part number UWS00333. It features aluminum construction with fully welded seams and is guaranteed not to rust. Heavy duty stainless steel latches on both sides will lock on drivers side. The patented foam filled lid provides installation and protection from the elements. Heavy duty gas cylinders help to lift the lid and hold it open at a full 90 degrees. It contains a divided tray for tools and other miscellaneous items.
UWS Toolbox Review - 2008 Ford F-350
Today on this 2008 Ford F350 were going to do a test fit of part number UWS07045. This is the UWS low profile truck bed toolbox. Few things to know about this toolbox it is a crossover style and it sits on top of the truck bed side rails. This also has a low profile design it gives a little more visibility out of the rear windshield. It also comes with a sliding tray to store small items. Plus it comes with J bolt installation hardware.
UWS Toolbox Review - 2012 Chevrolet Silverado
UWS 75-Gallon Transfer Tank and Chest Review - 2012 Chevrolet Silverado
Today on this 2012 Chevrolet Silverado were going to do a test fit of part number UWS06022 from UWS. This is UWSs 75 gallon L-shaped transfer tank with chest. Towards the cab of the truck is the transfer tank, and this is the lid for it. On the tank side, the height above the rails on the bed is going to be five and three quarter inches, including the cap. The back half of the tank is the chest, and it has two handles to open it up here. Our clearance between the bedrails is going to be about eight in the, and there is also three tabs to help hold it assembled in place.
UWS 45-Gallon Transfer Tank and Chest Review - 2012 Chevrolet Silverado
Today on this 2012 Chevrolet Silverado were going to do a test fit of part number UWS06019. This is their 45 gallon L-shaped transfer tank with a chest. Well start off our test fit by basically just putting it into the bed of a truck and centering it up in the middle. When we put it in place well make sure that the tank is firmly against the front of the bed. You can see how the tank has tabs on the side to help secure it to the bed. Theres also one at the bottom.
UWS Crossover Toolbox Review - 2012 Chevrolet Silverado
Today on this 2012 Chevrolet Silverado, were going to do a test fit of part number UWS00156 from UWS. This is a truck bed toolbox, narrow crossover style. The dimensions of the box are 69 inches long by 12 inches wide and nine and a quarter inches deep, and above the bedrails is about two inches in height. Well start off our test fit by putting it into the bed, and well scoot it up as close as we can to the edge of the bed, and then well open up our lid to check for clearance. Now, it looks like with the box pushed already up against the bed, we have plenty of clearance for the cab. That measurement will be two and three quarter inches.
UWS Crossover Toolbox Review - 2013 Ford F-150
UWS Wedge Toolbox Review - 2003 Dodge Ram
Today, on this 2003 Dodge Ram Pickup 2500 Series with the 8-foot bed were going to do a test fit of part number uws01048 from UWS. This is our truck bed chest. All right, a couple of things to know about this tool box is that it is a wedge series, so the bottom is a little bit narrower over in the top. The lid is also offset; the offset lid allows you to push the box all the way up to the front of a truck, so you can still open the lid without hitting the truck itself. Dimension of this box are 62 inches long by 20 inches wide and 17 inches deep. It is all aluminum construction.
UWS Crossover Toolbox Review - 2005 GMC Sierra
Today on our 2005 GMC Sierra, we'll be installing the UWS Truck Bed Toolbox, the Narrow Crossover Style, part number UWS00161. Note that this toolbox is 69 inches long, 12 inches wide, and 9-1/4 inches deep for a total of 3.7 cubic feet. It will stand at approximately 2 inches above the height of the bed rail on your truck bed. Now, let's go ahead and install the box. We'll set it up against the bulk end and even it out side to side. Now that we have a good idea where our truck box is going to sit, we're going to go ahead and turn it over and install the foam strips to protect the paint between the box and bed.
Subscribe to email newsletter
privacy - we don't send unsolicited email
All images, layout and content copyright etrailer.com